Official APEX Wheels Showroom Gallery Thread

[DAVECS1]

Can I get a quote on this exact setup! Those look amazing and are setup for what I like to do best!

Matte Bronze is out in the wild and looking gorgeous on this black S550, especially when wrapped in meaty Continental slicks.

18x11" ET52, 305/685-18 slicks, topped off with extended wheel studs and 25mm spacers up front.

- Cory

Sponsored

 

[Biggsy]

Welp...after staring at the computer screen and looking at so many pictures of fitments and playing with wheel tire calculators, I pulled the trigger to take advantage of the current sale and had the fronts delivered today. Decided to go with a square 19x11 set up but the front are +26 so no need for spacer or extended studs. will get the rears(+52) in a few weeks. Plan is to pick up 295/35 Conti ECS with a 3mm spacer in the back for flush fitment. Also in the plans before they get mounted is to ceramic coat them in addition to the Bullitt Brembo calipers together and install them together along with metal TPMS from OP Mustang. Thanks Cory for all your help! They look amazing!

 

[Apex Wheels]

Can I get a quote on this exact setup! Those look amazing and are setup for what I like to do best!

Hi there, a set of the 18x11" ET52 in Matte Bronze is $1,456.00 plus shipping. I do agree they look amazing

https://www.apexraceparts.com/wheels/mustang-wheels/18x11-et52-apex-ec-7-mustang-wheel.html

- Cory

 

[Apex Wheels]

Welp...after staring at the computer screen and looking at so many pictures of fitments and playing with wheel tire calculators, I pulled the trigger to take advantage of the current sale and had the fronts delivered today. Decided to go with a square 19x11 set up but the front are +26 so no need for spacer or extended studs. will get the rears(+52) in a few weeks. Plan is to pick up 295/35 Conti ECS with a 3mm spacer in the back for flush fitment. Also in the plans before they get mounted is to ceramic coat them in addition to the Bullitt Brembo calipers together and install them together along with metal TPMS from OP Mustang. Thanks Cory for all your help! They look amazing!

Niiiiice, those are going to look so good on your car.

 

[ModularKid21]

Welp...after staring at the computer screen and looking at so many pictures of fitments and playing with wheel tire calculators, I pulled the trigger to take advantage of the current sale and had the fronts delivered today. Decided to go with a square 19x11 set up but the front are +26 so no need for spacer or extended studs. will get the rears(+52) in a few weeks. Plan is to pick up 295/35 Conti ECS with a 3mm spacer in the back for flush fitment. Also in the plans before they get mounted is to ceramic coat them in addition to the Bullitt Brembo calipers together and install them together along with metal TPMS from OP Mustang. Thanks Cory for all your help! They look amazing!

After looking through those wheels on sale, I seriously contemplated getting the same wheel in 19x10. Ironically, I just put the Bullitt Brembo’s on my car. Love em

 

[DAVECS1]

I am contemplating some EC-7s very hard! I have a couple trap lines out right now. I like the fact these wheels are in stock and already my favorite color.

 

[ModularKid21]

Are the EC-7’s in 19x10 offered in matte bronze?

 

[DAVECS1]

Only in the 11" width, not sure why

 

[Apex Wheels]

Are the EC-7’s in 19x10 offered in matte bronze?

Yes they actually will be offering Matte Bronze in 19x10" very soon. We just recently decided to put them into production, I'd anticipate them being ready in about 2 months!

- Cory

 

[ModularKid21]

Yes they actually will be offering Matte Bronze in 19x10" very soon. We just recently decided to put them into production, I'd anticipate them being ready in about 2 months!

- Cory

Excellent! If you need a test vehicle, I know where there’s a white s550 that would look KILLER with some bronze shoes

 

[Biggsy]

After looking through those wheels on sale, I seriously contemplated getting the same wheel in 19x10. Ironically, I just put the Bullitt Brembo’s on my car. Love em

lol yea i saw your post and started looking at my account to see how i could get those 2 piece rotors lol. looks great man!

 

[ModularKid21]

lol yea i saw your post and started looking at my account to see how i could get those 2 piece rotors lol. looks great man!

Thanks man. If it weren’t for the group buy, I would’ve passed on them. Looking through Apex’s gallery, I saw a guard gt with black sm-10’s. It looks awesome, nice choice

 

[Apex Wheels]

Adam's Boss 302 looks so good on our Anthracite EC-7's in 18x10" square wrapped in 295/30-18 Hoosier R7 tires. Anyone else have wheels that match their livery?

- Cory

 

[Apex Wheels]

Mark sent us some fresh shots of his GT350 on our Satin Black SM-10 wheels and the first thought that comes to mind is jaw-dropping.

19x11" ET52 wrapped in 305/30-19 Bridgestone RE71R tires at all four corners for a rotatable, square setup when combined with 25mm front spacers and ARP extended wheel studs.

- Cory

 

[17droptop]

The rainy season is almost over in Ohio and had time to drop the top.

Apex EC-7 ET40 18x10

Sponsored