PP2 real life pictures

[foxcoupefan]

they are decent in the rain. stellar in the dry. no complaints really. other than having gotten 3 punctures in the rear tires...all three of which required replacement. but i can't see this as a ding against the tires, just my downright horrible luck.

like how does this even happen!!!?!?!??!

Holy crap! This just happened to me on my PP2 two weeks ago. Same damn rubber bungee but it was still full size with hooks on both sides. Flung up and broke my rock guard and chipped my paint. Lucky I got it looking pretty good and it's now unnoticeable unless you are me. Thought It was the cords coming out. Could have been even worse.

 

[akitteh]

The PP2 rims are awesome. Shots from the side don't really capture the depth in the spoke pattern. Here's a test shot :-)

 

[cmxPPL219]

The PP2 rims are awesome. Shots from the side don't really capture the depth in the spoke pattern. Here's a test shot :-)

One of the best-looking oem wheels from any manufacturer

 

[Schwerin]

What I really like about the PP2 wheels is they are like a modern FR500 wheel, and I had those on my Mach1. https://www.americanmuscle.com/chromefr500-17in-9904-stan.html

 

[cmxPPL219]

After daily driving the PP2 in a long, cold winter:
This past weekend, it was finally warm enough to throw on the oem PP2 wheels and tires.
A few quick pics:

This was the winter setup:
Ford Performance Bright Silver 19" wheels (Basically the GT PP1 wheel painted silver)

 

[foxcoupefan]

Poor little guy has been sitting in the garage for a few weeks. Had to come in to my shop this morning and thought I would take it for a spin. Probably will spend the afternoon cleaning it up. My garage is cleaner than most homes yet you still get dust. Part of living in Nevada I guess. Have a great Saturday.

Photos just don't do the stance of this car justice. This angle makes the rear gap look larger than in person.

 

[cmxPPL219]

Poor little guy has been sitting in the garage for a few weeks. Had to come in to my shop this morning and thought I would take it for a spin. Probably will spend the afternoon cleaning it up. My garage is cleaner than most homes yet you still get dust. Part of living in Nevada I guess. Have a great Saturday.

Photos just don't do the stance of this car justice. This angle makes the rear gap look larger than in person.

View attachment 359935

Looks amazing to me, single pic or not!

 

[foxcoupefan]

Better shot of the actual ride height.

 

[PortalMaker]

^Is that stock or do you have BMR springs or something? Looks really good.

 

[foxcoupefan]

^Is that stock or do you have BMR springs or something? Looks really good.

Ford Performance springs, Maximum Motorsports CC plates at 2.2 neg plus Cortex, FTB, and BMR stuff.

Thanks for the compliment. The PP2 just looks so good, even stock.

Pulling the window tint off eventually. My wife custom ordered the car, and the dealer accidentally put tint on. No tint so you can see the roll bar once installed.

 

[LFG_Cory]

In case anyone is interested, the PP2 I order back in October has arrived at the dealership and is available.

 

[Meraki Autoworks]

Love it!

-Josh

 

[Schwerin]

Is it me or does the PP2 lip look like a different color from the PP1 lip?

 

[Lightning Struck]

How have the larger tires been holding up? I am going to switch to the PS4S almost as soon as I get mine** and I love the way the 325s look on the rear, but wanted to make sure you haven't run into any issues with them.

** Florida's rainy season + balding tires = an experience I've already gone thru and scratched off my bucket-list

I've got 305f/325r PS4's on my car. Drove it for the first time today in heavy rain, and at interstate speeds it was fine. They're not as nimble as SC2's, but they are a much friendlier driving tire.

 

[[email protected]]

Ford Performance springs, Maximum Motorsports CC plates at 2.2 neg plus Cortex, FTB, and BMR stuff.

Thanks for the compliment. The PP2 just looks so good, even stock.

Pulling the window tint off eventually. My wife custom ordered the car, and the dealer accidentally put tint on. No tint so you can see the roll bar once installed.

Can I do just springs without the other stuff?