Engine fastener hardware

[whatsup62]

Building a motor from scratch basically and accumulating parts.
Anyone know of a place to find bolt sizes and qtys (oil pan, timing cover, oil pick-up tube, etc.)?
Got the big stuff covered (head bolts, main bolts, balancer) but the small stuff I cant find info on anywhere.

Sponsored

 

[Andrewg]

Going through the same thing myself. Buying a shortblock and getting all the small parts from Autonation Whitebearlake and @beefcake. What specifically are you looking for? Here's my list in case it helps. Keeping the stock heads and just getting them cleaned out and new seals. Went through the workshop manual and just made a list of all the parts the manual says to dispose of and not resuse. so probably a bit overkill but figured i'd do it once and replace all the little stuff.

Head Gaskets FR3Z-6051-A / FR3Z-6051-F
Timing Cover Seal x3 BR3Z-6020-C / BR3Z-6020-D / BR3Z-6020-B
Front Crank Seal XW4Z-6700-B
Rear main seal AT4Z-6701-A
Exhaust manifold gaskets (x2) FR3Z-9448-A
Exhaust manifold studs (x16) W714869-S431
Exhaust manifold nuts (x16) W714870-S430
Water pump o-ring F1VY-8507-A
Oil pickup tube o-ring F5RZ-6626-B
coolant outlet gasket (LH cylinder head) 7T4Z-8590-A
coolant outlet o-ring (RH cylinder head) AC3Z-8527-A
CHT sensor 9L8Z-6G004-F
VCT system oil filters (x4) 9L8Z-6C683-A
Oil pan baffle & gasket BR3Z-6710-A
Oil filter adapter gasket FR3Z-6840-A
Valve stem Seals (x32) BR3Z-6571-B
Boundary Oil Pump Gear and Crank Gear (teambeefcakeracing)
ARP flywheel bolts arp-156-2801 (teambeefcakeracing)
Reische 170* Thermostat rpford50 (teambeefcakeracing)
Head cooling mod 455478 (teambeefcakeracing)
ARP head studs arp-256-4301 (teambeefcakeracing)

 

[whatsup62]

@Andrewg that list is very very helpful.Thanks!!
The one thing I still am looking for is the oil pickup tube to oil pump bolts.

 

[bauern]

W714962-S437.
Fordparts.com will show you all the small hardware bits that you need.

 

[Andrewg]

@Andrewg that list is very very helpful.Thanks!!
The one thing I still am looking for is the oil pickup tube to oil pump bolts.

No problem mate. Got a part number but i'm not 100% sure it's correct -N605904-S

May want to check with Benny @LevittownFordParts or Mike @fordsvtparts

Alternatively i know ARP make a set of bolts as MMR includes them in their high flow pick-up tube kit but i coudn't find them on the ARP site. https://www.teambeefcakeracing.com/455550.html

 

[bauern]

That part number quoted (W714962-S437) is a rear support bolt for a 3.5 Ecoboost cover.

These bolts have multiple applications.

N605904 is the bolt that attaches the pickup tube to the spacer for the main bearing cap bolt.

 

[whatsup62]

Thanks to both of you...yeah I looked all those up. Decided to go with the MMR tube that came with bolts. Thought the tube would be a good idea for this big of a build.

 

[LevittownFordParts]

@Andrewg that list is very very helpful.Thanks!!
The one thing I still am looking for is the oil pickup tube to oil pump bolts.

Here's what we show

Tube - BR3Z-6622-A
Tube to pump bolts - W714962-S437

-Benny

 

[Valentinet99]

Here's what we show

Tube - BR3Z-6622-A
Tube to pump bolts - W714962-S437

-Benny

Hi, i was looking at the ford performance tune for the 2018 ecoboost mustang Part# M-9603-M4C, I noticed the price went up quite a bit from what people were saying it was just a few days earlier and was wondering if you had any coupon codes to help out they would be much appreciated.

 

[LevittownFordParts]

Hi, i was looking at the ford performance tune for the 2018 ecoboost mustang Part# M-9603-M4C, I noticed the price went up quite a bit from what people were saying it was just a few days earlier and was wondering if you had any coupon codes to help out they would be much appreciated.

PM sent

Thanks,
Benny

Sponsored