2018 GT PP2 front splitter

[whokilledkaji]

Looks fine to me. The texture is different but it's the same on actual PP2s

This is the splitter from Cuztom Tuning? It looks great in your pics!

I have a few questions...
What GT did you install this on? 2018 GT PP?
Was it difficult to install?
You need your own self tapping screws?

Sponsored

 

[armykyle1 [HACKED ACCOUNT]

This is the splitter from Cuztom Tuning? It looks great in your pics!

I have a few questions...
What GT did you install this on? 2018 GT PP?
Was it difficult to install?
You need your own self tapping screws?

Yes from them, 2018 GTPP. Install was easy. It comes with some screws but I added a few more because I'm picky. I used existing holes to line it up and then got them snug. Once it was snug a made a few tweaks and perfect. Maybe an hour total in the project.

 

[Enzo]

Steeda mag ride lowering springs. Very happy with them.

These are going on next week

please post the pics! I would love to see the car with these on! Are they same spec as the pp2?

 

[armykyle1 [HACKED ACCOUNT]

please post the pics! I would love to see the car with these on! Are they same spec as the pp2?

Different offsets. So there shouldn't be any poke on the fronts.

 

[Troutwrangler]

Steeda mag ride lowering springs. Very happy with them.

These are going on next week

Sweet wheels and tires....a little more bronze color in them than factory PP2 wheel.
Look forward to seeing pictures after install....

 

[Lightning Struck]

Splitter is close, but not exactly identical to an actual PP2 splitter.

 

[Cardude99]

Does anyone know if the pp2 splitter goes under the car and creates an area of negative pressure like the APR splitter? I'm just curious, haven't been able to find a good photo of a pp2 that shows underneath. Wondering which one is better.

 

[Troutwrangler]

Does anyone know if the pp2 splitter goes under the car and creates an area of negative pressure like the APR splitter? I'm just curious, haven't been able to find a good photo of a pp2 that shows underneath. Wondering which one is better.

Yes, the factory PP2 splitter goes back under the car to the front of the control arms, I think. Ill go out in the garage and see if I can see for sure...
This picture is the best I can do without a lift. Don't know if it will help...
This picture was taken in front of the passenger side front tire. There is a flat plastic "pan" that stops about in line with the front of the tires. You can see how there is a channel formed just inside that is supposed to help guide some air up to the brakes.
The "pan" on the PP2 is not as extreme as the GT350 "pan". A buddy of mine has an '18 GT350 and a car lift. We put both cars on the lift to compare the underside of the cars. The GT350 "pan" goes clear to the back of the front tires, and there is a "trap door" in the pan to access the oil filter.
I apologize for not being able to get you a better picture.

 

[Cardude99]

Yes, the factory PP2 splitter goes back under the car to the front of the control arms, I think. Ill go out in the garage and try to see it for sure.

Hey thanks man, any way you could put up a pic?

 

[Troutwrangler]

Hey thanks man, any way you could put up a pic?

I edited my previous post with best pic I could do.

 

[Troutwrangler]

I edited my previous post with best pic I could do.

Going back to your other post... I'm not familiar with the APR splitter, so can't comment on similarity/differences.

 

[Cardude99]

I edited my previous post with best pic I could do.

Hey thanks man

 

[Troutwrangler]

Hey thanks man

You're welcome-

 

[Lightning Struck]

I've got my car up in the air right now, when I get home from work I'll snap a pic and edit this post to include it.

 

[NotMarc]

Looks fine to me. The texture is different but it's the same on actual PP2s

I've got my car up in the air right now, when I get home from work I'll snap a pic and edit this post to include it.

Can these be installed without removing the front bumper from underneath?

Sponsored