Well, supercharger ordered...

[Manders Mustang]

thats very on the cheap side in that range you're looking at perhaps the edelbrock or perhaps a bottom end centri blower.

or a roush s1 on b2b prices.

Sponsored

 

[Kristian87]

Kenne Bell

 

[hinch]

Kenne Bell

ruled that one out as i'm not aware of anyone doing a tune for the kb for uk spec cars unless he's going to get a custom tune done locally in which case he's braver than I am

 

[Manders Mustang]

ruled that one out as i'm not aware of anyone doing a tune for the kb for uk spec cars unless he's going to get a custom tune done locally in which case he's braver than I am

There's KB UK tunes.... There's like 4 or 5 of them in the country, 4 installed, one waiting to go on a certain white M6G members car.

FWIW, Bill Sheppherd put one on his first car, the power the KB made was literally 150 less than listed, he took it off and returned it.

 

[hinch]

yeah its a shitty old design pretty much the same as the old gen 1 design from the s197 also looks terrible :( having said that whipple to me don't look any better

 

[Manders Mustang]

yeah its a shitty old design pretty much the same as the old gen 1 design from the s197 also looks terrible :( having said that whipple to me don't look any better

Whipple atleast makes almost the power (Not seen any make the actual power)

 

[CraigJ]

One I have coming like most doesn’t make the claimed power but isn’t that far off. Seen graphs for around the 550rwhp so about 650ish crank.

Seen the kit with custom tuning hit 600rwhp and stage two in the high 600’s at the wheels.

 

[Manders Mustang]

One I have coming like most doesn’t make the claimed power but isn’t that far off. Seen graphs for around the 550rwhp so about 650ish crank.

Seen the kit with custom tuning hit 600rwhp and stage two in the high 600’s at the wheels.

Rhymes with woosh then

 

[CraigJ]

Well, it’s here

 

[CraigJ]

Had a bit of delay with customs as my contact details were incorrect on there paper work so they could not get in touch with me.

I rang to find out why it was delayed and got it sorted.

 

[hinch]

thats very on the cheap side in that range you're looking at perhaps the edelbrock or perhaps a bottom end centri blower.

so i was spot on then ;)

looking good and i do believe they're considerably easier to fit than the whipple and roush/fr kits as again pretty sure they don't need the kbrace trimming.

 

[hinch]

just noticed thats a built in wastegate too oO if you want more boost just cut the pip and put a T in there leave the T bit venting to atmos and it'll give you more psi before it pushes the spring and releases.

 

[CraigJ]

Yeah pretty straight forward fitmemt
There is only 2 holes that have to be tapped larger but that’s it really.
Think a bit of the plastic scuttle has to be trimmed slightly too.

 

[Gloucesternige]

Lovin those pics!!

Looking forward to the how to fit one hour video!!

 

[autobahnGT350]

That video is funny as shit. LMAO, had to watch several times, passed around to others. Thanks for sharing and good luck with the install.

Sponsored