sigintel
Well-Known Member
- Joined
- Nov 24, 2015
- Threads
- 59
- Messages
- 2,039
- Reaction score
- 1,068
- Location
- Republic of Texas, God's Country
- First Name
- Ray
- Vehicle(s)
- 2018 GT
If you have removed the lower grill, on the drivers side near the two front bumper support bolts there is a series of holes.
You can run a large hardware store threaded link (maillion) thru there.
Prime it white and then bright red and put a piece of ribbon or red webbing just hanging so its more obvious or add blue tape or white or red arrow to bumper.
You could always buy an expensive locking climbing carabiner if weight matters.
Never put one on the rear. But if I did, maybe take the plate off and measure just right you can run a piece of metal strap thru a slot hidden by plate and wrap it downward from rear bumper beam and bolt to lower edge of beam. Use strap folded in half so it makes a loop and ring is removable.
You can run a large hardware store threaded link (maillion) thru there.
Prime it white and then bright red and put a piece of ribbon or red webbing just hanging so its more obvious or add blue tape or white or red arrow to bumper.
You could always buy an expensive locking climbing carabiner if weight matters.
Never put one on the rear. But if I did, maybe take the plate off and measure just right you can run a piece of metal strap thru a slot hidden by plate and wrap it downward from rear bumper beam and bolt to lower edge of beam. Use strap folded in half so it makes a loop and ring is removable.
Sponsored
Last edited:
