Was thinking of the hard textured plastic around the shifter and center console storage.What center and what parts of the doors? It will stick to almost anything. Textured abs is tough without a primer coat. Key is to clean the surface with an isopropyl/water mix to strip oils and waxes.
It should work I did the shifter bezel but not the whole center console. Was considering doing the kick panel at the bottom of the console. I'll have a short day at work so when I get home I'll take some scraps and see if it will stick and finish good and I'll let you know. I would say yes though because it stuck to the window switches and that had a similar texture.Was thinking of the hard textured plastic around the shifter and center console storage.
They definitely are getting alot more realistic, and the new gloss finishes I've seen have almost no orange peel.It looks like the Carbon Fiber Vinyls are starting to look more real?
Which 3 m pattern did you use?There are a number of good ones, 3m and Avery are popular. Just dont get the cheap Ebay or Amazon stuff. I'm partial to 3m because I've used it alot. Check out metrorestyling.com all the brands on their site are going to be quality. 3m may not make the film you want or vice versa. That's why I reccomend the site. You can pick the pattern you want and know your getting quality materials. Plus you can buy samples for 1 dollar to make sure it looks right.
I am not affiliated with metrorestyling.com so I get nothing out of you buying from them. It's just a quality site good pricing good customer service and fast shipping. I can honestly say out of the hundreds of rolls I've ordered i.have never had an order messed up.
.....and like the pattern you used in yourWhich 3 m pattern did you use?
Im looking at wrapping some interior pieces
on my older Stang
https://www.metrorestyling.com/3M-Scotchprint-1080-CF12-Carbon-Fiber-Vinyl-Wrap-p/3m1080-cf12.htm.....and like the pattern you used in your
pictures
https://www.metrorestyling.com/3M-Scotchprint-1080-CF12-Carbon-Fiber-Vinyl-Wrap-p/3m1080-cf12.htm
This is pretty much the one I used. It says gloss in the description but I dont think its gloss like a clear coat. Mine technically is satin blend of matte and gloss so this should be close. Like I said though order samples before you spend bigger bucks. 5ftĂ— 1ft is the size I ordered to do my trim with plenty left over. And 5ftx2ft is enough to do the dash pieces in case someone was curious. They also sell scrap boxes for like 20 bucks full of all kinds of patterns that would show you lots of options.