Hellion Street Sleeper turbo kit install pics and review

[MisterNitro]

@kcc0521 Hey, yes i have the GFB gforce II boost controller mounted right in front of my shifter in coin tray location, fathouse fab makes a cool little bracket for it. I ran the small cable from boost controller under the center console and down under the rubber seal for the shifter then along the tranny tunnel up to the solenoid which i ziptied to the oil resivoir bracket.

I ran my vacuum lines just like this configuration and works perfect for me.

Are you still satisfied with the GFB Gforce II? I want to order a controller this week and was about to pull the trigger on an EBoost 2 but for what I need and the cost, the GFB seems great. I assume it came with a solenoid and everything you need? Thanks

Sponsored

 

[Manny231988]

I went with the eboost2 dual solenoids for my Hellion setup

 

[NightParade]

@MisterNitro Yes i love it, works perfect and comes with everything to install including the solenoid.

 

[MisterNitro]

@MisterNitro Yes i love it, works perfect and comes with everything to install including the solenoid.

Thanks for the info, ill order one up! Was thinking if i need another solenoid but ill just run it with one for now. Will be fine for my use I think.

 

[MisterNitro]

@MisterNitro Yes i love it, works perfect and comes with everything to install including the solenoid.

Who did you get yours or recommend getting it through? Thanks!

 

[NightParade]

Who did you get yours or recommend getting it through? Thanks!

I went through Hellhorse performance, they have a gfb gforce III now as well.

 

[Beano]

Very neat result, absolutely luv it.

I’ve always been a twin-turbo guy, soon I will again chat to Kevin/Damian at Mystangmods in Melbourne, as they are working with Hellion on a RHD kit for the Aussie market. Was excited after chatting to them both this past Saturday, Damian there is going to be building the first one here.

Hoping to replace my supercharger and get close to the 1000hp level myself. Looking forward to the day, can’t wait

Thanx for the inspiration, enjoy the Beast!

Cheers,
Beano

 

[TenSecond408]

@NightParade What AR housing did your kit come with? Mine just arrived and are AR.68, just checking to see if they are the same.

Sick setup BTW!

 

[gstboy69]

Help

I specifically need those two fitting. I have tried some similar ones and none screw like the one that comes with the factory oil pump. help me please.

 

[gstboy69]

 

[drive_55_not]

That is a o-ring port fitting to a flare, Can say what size but the pump parts list show it's either a 5/8" - 10an port to a 10an hose flare, or a 3/4" 12an.


.

 

[gstboy69]

That is a o-ring port fitting to a flare, Can say what size but the pump parts list show it's either a 5/8" - 10an port to a 10an hose flare, or a 3/4" 12an.


.

Its -8 -8 an but I tried with some brands and the thread is thinner and does not run more than 2 turns by hand

 

[drive_55_not]

Its -8 -8 an but I tried with some brands and the thread is thinner and does not run more than 2 turns by hand

Hummmmm, That looks like a SCP pump, I have one and it is 10an to 10an.

The SCP site shows they use a #7 port to #8 hose, Wonder if that is what it is?
SCP part number - 1237 -- #7 port to #8 hose -- $7.25

http://parts.scpdrysumps.com/

.

 

[gstboy69]

Problem resolve fast response from Hellion. Thanks

 

[HELLION TURBO]

Problem resolve fast response from Hellion. Thanks

Your welcome!! Let us know if we can help in the future!

Team Hellion

Sponsored