2018 SB PP1 - 17x10 VMS & 305's

[1badrz28]

Great wheels for the price

Sponsored

 

[eveslow78]

Great wheels for the price

So sick. Lmk what rubbers you are going with on the fronts.

 

[CHIWS6]

i'll getting a rear set only, did you install the tpms sensors?

 

[eveslow78]

Ya I ordered TPMS on ebey for ~$20 a pair.

I never even programmed them and no light on dash.

 

[CHIWS6]

Ya I ordered TPMS on ebey for ~$20 a pair.

I never even programmed them and no light on dash.

cool!! Do you have a part # on what lug nuts you used?

 

[eveslow78]

I actually used black stock style lugs from American Muscle.

 

[Warp9]

Nice wheels. They have a 17x9 +35 as well

 

[jrmadtork]

what spring u running ? and got magneride suspension ?

 

[NGOT8R]

How are these holding up for you after regular use OP? What power level are you at and have you experienced any tire slip on the wheel? Trying to determine if a beadlock version of this wheel with an ET Street bias ply tire would be ideal on a nitrous car with MT-82 trans? Thanks

 

[Andy13186]

How are these holding up for you after regular use OP? What power level are you at and have you experienced any tire slip on the wheel? Trying to determine if a beadlock version of this wheel with an ET Street bias ply tire would be ideal on a nitrous car with MT-82 trans? Thanks

My tire moves around the rim. Not sure if its because of how they were mounted or some type of lube they may have used or what. Every drag mode 1-2 shift on the street they move like a quarter inch, so they cant be balanced. The tires I am using are the MH racemaster 325's. Kind of annoying but not really noticible until above 80 mph then its just a bit of a vibration.

 

[NGOT8R]

My tire moves around the rim. Not sure if its because of how they were mounted or some type of lube they may have used or what. Every drag mode 1-2 shift on the street they move like a quarter inch, so they cant be balanced. The tires I am using are the MH racemaster 325's. Kind of annoying but not really noticible until above 80 mph then its just a bit of a vibration.

Do you think a beadlock would be more beneficial to you, or is that 1/4” slip on thr rim helpful to your half shafts surviving? What kind of power and torque are you putting to the ground?

 

[Andy13186]

Do you think a beadlock would be more beneficial to you, or is that 1/4” slip on thr rim helpful to your half shafts surviving? What kind of power and torque are you putting to the ground?

Not really sure. The give probably would help parts survive but I am making only like 460 rwhp and this is on the street, so I dont know how much they would move around the rim on a track, or with more HP. I have a whipple on order though so I guess ill find out.

 

[NGOT8R]

Not really sure. The give probably would help parts survive but I am making only like 460 rwhp and this is on the street, so I dont know how much they would move around the rim on a track, or with more HP. I have a whipple on order though so I guess ill find out.

If you had to do it over again, would you still buy that same wheel, or some other wheel? Has the finish held up well on them and aside from tire slip, is there anything else that you don’t like about the wheel? Thanks

 

[Andy13186]

If you had to do it over again, would you still buy that same wheel, or some other wheel? Has the finish held up well on them and aside from tire slip, is there anything else that you don’t like about the wheel? Thanks

The wheel is great, I dont have them on all the time though, I am usually on my street tires. I would have them mounted dry or with some type of adhesive possibly. They may not be the lightest option but I think they are the best value.

 

[NGOT8R]

The wheel is great, I dont have them on all the time though, I am usually on my street tires. I would have them mounted dry or with some type of adhesive possibly. They may not be the lightest option but I think they are the best value.

Great! That’s what I was hoping to hear. Thanks

Sponsored