SVE SP2 wheels, black or graphite?

[CEHollier]

Very nice. The graphite set off the blue. A little negative camber in the rear alignment may tuck those tires. I had a bad alignment (almost 0 degrees rear camber) and my rears tires stuck out about 1/4 inch. A local shop corrected to -1.5 and that pulled my rear tires nicely. Factory specs our cars to -2.3 degrees but with wider tires -1.5 degrees is optimum as advised by BmacIL. Are you using spacers?

Sponsored

 

[CEHollier]

https://www.mustang6g.com/forums/threads/something-is-wrong-car-alignment.106253/ my post on the camber issue.

 

[LSchicago]

Very nice. The graphite set off the blue. A little negative camber in the rear alignment may tuck those tires. I had a bad alignment (almost 0 degrees rear camber) and my rears tires stuck out about 1/4 inch. A local shop corrected to -1.5 and that pulled my rear tires nicely. Factory specs our cars to -2.3 degrees but with wider tires -1.5 degrees is optimum as advised by BmacIL. Are you using spacers?

They are cambered from the factory a bit, I'm leaving them alone. I have no intention of lowering the car, so it's fine. If I was going to lower it I would've bought the 305's in the back. No spacers, these are bolt on and go. LMR does a good job making sure wheels fit.

 

[LSchicago]

Those look so nice ! Now you should get a chin spoiler and lower it , it'll be perfect Btw have you checked to see if the stock center caps fit these wheels?

I'm pretty sure they will fit, but I'm going to leave the SVE caps for now. The center caps fit on other SVE wheels, so that should be the case here too.

 

[Lastofthejedi]

They are chambered from the factory a bit, I'm leaving the alone. I have no intention of lowering the car, so it's fine. If I was going to lower it I would've bought the 305's in the back.

I ordered this setup last night for my 15 GT. I have the Eibach Pro Kit and will report if there are any issues with the 325/30/19 rubbing. And I’ll probably post a few pics so people can see how they look on Ingot Silver.

 

[LSchicago]

I ordered this setup last night for my 15 GT. I have the Eibach Pro Kit and will report if there are any issues with the 325/30/19 rubbing. And I’ll probably post a few pics so people can see how they look on Ingot Silver.

325's will be tight on a lowered car! BTW, you might've got the last set of these. This morning they showed out of stock for a few days.

 

[rtg]

I ordered the NT05's Gloss Black. Due in today. I also am on Eibach Pro springs. Not sure when I will get them on but snowed here last night. So A/S on right now. Planning on throwing them on for some pictures maybe this weekend....

Rob

 

[Lastofthejedi]

325's will be tight on a lowered car! BTW, you might've got the last set of these. This morning they showed out of stock for a few days.

Not too surprised to hear that. I think this wheel will be a popular choice. Price point is good for a light wheel that looks VERY similar to the PP2 wheel.

 

[LSchicago]

Not too surprised to hear that. I think this wheel will be a popular choice. Price point is good for a light wheel that looks VERY similar to the PP2 wheel.

Too me they are almost exact replicas (style, not color) from the face. I looked closely, if there are any style differences they would be hard to tell.

 

[LSchicago]

My car finally got to see some sunlight today.

 

[CEHollier]

My car finally got to see some sunlight today.

Very nice. Magnetic does it justice.

 

[Silver Bullitt]

No rubbing anywhere so far.

Glad to hear. Thinking a set of 19x11's with 325/30/19 MT Streets are in my future.

 

[Silver Bullitt]

Too me they are almost exact replicas (style, not color) from the face. I looked closely, if there are any style differences they would be hard to tell.

About the only difference I've noticed is the valve stems on the OEM PP2 wheels are in the narrow space on the 19x10.5's and the wide space on the 19x11's. They are in the narrow space on both the 19x10 and 19x11 replicas. Other than that, it's just the centercaps.

 

[LSchicago]

About the only difference I've noticed is the valve stems on the OEM PP2 wheels are in the narrow space on the 19x10.5's and the wide space on the 19x11's. They are in the narrow space on both the 19x10 and 19x11 replicas. Other than that, it's just the centercaps.

Valve stems look the same on all 4 PP2's to me. Here is pics of all 4 wheels in this Ebay listing: https://www.ebay.com/itm/1633844322...99&_trkparms=gh1g=I163384432234.N36.S1.R1.TR1

 

[Silver Bullitt]

Valve stems look the same on all 4 PP2's to me. Here is pics of all 4 wheels in this Ebay listing: https://www.ebay.com/itm/163384432234?_trksid=p2334524.m570.l5999&_trkparms=gh1g=I163384432234.N36.S1.R1.TR1

Look again. Fronts are in the smaller triangle space. Rears are in the larger rectangular space. The first two pics are front, the next two pics are rear (although pic 4 is a little harder to see - it's upper left in the pic).

Sponsored