Sponsored

5.0 Dyno Chart Compilation

Aubrey

GT4949
Joined
Nov 7, 2017
Threads
10
Messages
201
Reaction score
165
Location
Sydney, Australia
Vehicle(s)
Planning the next one!
Vehicle Showcase
1
Stock Aussie 2017 GT.
Reading in kw/nm
Dyno was reading about 10% down from “normal”.
My torque looks low, and is lambda right?
Thanks!
8F6FEAF2-D121-44D8-8EA8-0564330EED9A.jpeg
Sponsored

 

Burkey

Well-Known Member
Joined
Feb 9, 2016
Threads
87
Messages
5,541
Reaction score
3,520
Location
Australia
Vehicle(s)
2016 Mustang GT
Vehicle Showcase
1
256 KW = 343 HP. Seems low ... if it was 10% higher it would be around 377 HP (281 KW).

Lambda info. Lambda of 0.7 might be slightly rich
http://diagtools.lv/soft/Lambda_eng.pdf
Stock Aussie cars make 306kw at the flywheel (poor header design in the conversion process and slightly lower octane fuel).
250 (ish) kw at the tyres is fairly normal for a manual. Some dynos read 230, others show 280.
If you can lose only 26kw (30hp) through the drivetrain, there’s some magic going on.
 

bakerjd

Well-Known Member
Joined
Jul 26, 2014
Threads
10
Messages
603
Reaction score
226
Location
North Carolina
First Name
Josh
Vehicle(s)
2018 Mustang GT


Put me down for 1024whp/827ft-lbs. Pull done on a Mustang Dyno. 2018 Stock engine. Armageddon Twin Turbos.
 

Sponsored

Aubrey

GT4949
Joined
Nov 7, 2017
Threads
10
Messages
201
Reaction score
165
Location
Sydney, Australia
Vehicle(s)
Planning the next one!
Vehicle Showcase
1
Stock Aussie cars make 306kw at the flywheel (poor header design in the conversion process and slightly lower octane fuel).
250 (ish) kw at the tyres is fairly normal for a manual. Some dynos read 230, others show 280.
If you can lose only 26kw (30hp) through the drivetrain, there’s some magic going on.
Updated, and looking far more realistic! Guessing at 20+ rwkw gain over stock based on this dyno.
EQpSl73XTbCBuUqDJTXngA.jpg
 

gqneon

Well-Known Member
Joined
Jun 25, 2015
Threads
91
Messages
867
Reaction score
143
Location
Westfield, IN
Vehicle(s)
18 GT PP / Manual
2018 Mustang GT 6-speed Manual
Stage 2 Gen 5 Whipple, Pypes longtubes, ID1050x, pump gas, Lund tune
Stock pulley size (3.875" - about 9-10psi)
Pulls 1 and 2 were to about 7k, pull 3 was to 7500 rpm

31C87E40-E2E0-4F38-BB1D-BCB9ED4563EB.jpeg
 

Platinum_5.0

Well-Known Member
Joined
Jan 8, 2018
Threads
12
Messages
415
Reaction score
190
Location
Edmonton, Canada
First Name
Daniel
Vehicle(s)
2021 10R Whipple
2017 GT 6 speed. Gen 3 stage 2 Whipple. Longtubes, 3.6 pulley and 94 pump fuel. Rob Shoemaker tuned.
06112018 mustang Daniel.png
 

Sponsored

18RTRSpec2

New Member
Joined
Nov 18, 2018
Threads
0
Messages
2
Reaction score
0
Location
Baltimore, Maryland
First Name
Adam
Vehicle(s)
2018 Mustang RTR Spec 2 A10. 2016 F150 4Wd 3.5 Ecoboost. 1993 Cobra teal. 1986 Mustang GT
2018 RTR Spec 2 NA A10 Mods: Jet Hot 1 3/4 Long Tubes, DSS Driveshaft, GT350 DS axle, 3,73s Torsen Cast Iron center section, Rev Auto Flex Fuel tune on E85
The 457 rwhp run was with the stock air box. 468 rwhp with the GT350/Bullitt cai. Still through the factory resonator and mufflers.

Thanks!
FullSizeR.jpg
IMG_7197.jpg
IMG_7196.jpg
 

AZ18yote

Well-Known Member
Joined
Nov 24, 2017
Threads
11
Messages
3,220
Reaction score
1,523
Location
Arizona
First Name
Bryan
Vehicle(s)
2018 Mustang GT Prem PP Magnetic

Enoch

Well-Known Member
Joined
Feb 10, 2015
Threads
83
Messages
2,199
Reaction score
1,099
Location
UK
First Name
Andy
Vehicle(s)
Guard 5.0 (Auto) Fastback, Saddle Leather
2016 UK mustang GT
2018 inlet manifold
Longtube headers
Roush CAI
Borla catback with 200 cell cats

28-A94884-420-A-4769-9935-4-C0-B4650-D525.jpg
 

Mikepol2

Well-Known Member
Joined
Jul 17, 2018
Threads
116
Messages
3,147
Reaction score
5,070
Location
Pittsburgh, PA
First Name
Mike
Vehicle(s)
2021 Mach 1, 2019 Ram 1500
Added JLT Cold Air (which is sort of a pain to fit) and a bama rev-x tuner with a 91 oct performance tune. Went from 419 to 445. Not bad? :)
So you have a 2018 manual, and only mods are the JLT CAI and Bama tune, and you jumped from 419 hp to 445 hp? That's really good, I haven't seen an increase like that on other 2018's with just the intake and tune. What were your torque numbers like? Did you gain any more torque down low?
 

fMErunnin

Well-Known Member
Joined
Jul 16, 2018
Threads
12
Messages
106
Reaction score
76
Location
St Louis
Vehicle(s)
2018 Mustang Gt
Vehicle Showcase
1
So you have a 2018 manual, and only mods are the JLT CAI and Bama tune, and you jumped from 419 hp to 445 hp? That's really good, I haven't seen an increase like that on other 2018's with just the intake and tune. What were your torque numbers like? Did you gain any more torque down low?
445hp/ 402tq. I am overly impressed. Did not expect those numbers. It is also for sale lol.
Sponsored

 
 




Top