- Joined
- Nov 3, 2017
- Threads
- 10
- Messages
- 53
- Reaction score
- 48
- Location
- Des Moines, IA
- Website
- competitionmotorsport.com
- Vehicle(s)
- 2017 GT350
- Thread starter
- #1
Competition Motorsport would like to introduce our newest roll bar product: the CMS Performance Roll Bar for the Shelby GT500 (and other current Mustang coupes). It is a bolt-in four-point roll bar made from Docol R8 advanced high-strength steel (AHSS), fully TIG welded to make it as strong, safe, and light as possible. CMS professionally powder coats each roll bar to your specification -- any color you like, including color-matched Mustang colors! -- and ships anywhere in the lower 48, all included in the price. We've been building bolt-in roll bars for years for the Porsche market -- GT3, GT3RS, Cayman GT4 and 987 Cayman -- and with the arrival of our GT350, we wanted to use the expertise we've gained building roll bars and race cars to create a premium product for the GT500, GT350/350R, and S550.
Fitment is guaranteed to be drop-in. We can't stand having to wrestle roll bars into cars, so we've perfected our manufacturing to the point where everything lines up perfectly. Installation takes a couple guys two to three hours. You can check out the instructions HERE.
We build all our roll bars (and race car chassis for that matter) out of Docol R8, an advanced high-strength steel that is 10-15% stronger than 4130 CrMo and about 40% stronger than mild DOM steel used in a lot of roll bars. Docol R8 doesn't crack under impact and doesn't get brittle at the welds like 4130. All of that lets us use 1.75" x .095" tubing to bring down weight while maintaining superior strength, impact absorption, rigidity, and longevity. As a result, the CMS GT350 roll bar weighs just 52 lbs. despite using all 1-3/4" tubing for a beefy look befitting the GT500.
As an introductory offer, from now through October 17, Mustang6G members get $300 off a CMS Performance Roll Bar. You can PM us for details or give us a call at (844) 438-7244. Just mention you saw us on Mustang6G!
Here are a couple photos (in Race Red and Deep Impact Blue) to give you an idea (there are more at competitionmotorsport.com):
Fitment is guaranteed to be drop-in. We can't stand having to wrestle roll bars into cars, so we've perfected our manufacturing to the point where everything lines up perfectly. Installation takes a couple guys two to three hours. You can check out the instructions HERE.
We build all our roll bars (and race car chassis for that matter) out of Docol R8, an advanced high-strength steel that is 10-15% stronger than 4130 CrMo and about 40% stronger than mild DOM steel used in a lot of roll bars. Docol R8 doesn't crack under impact and doesn't get brittle at the welds like 4130. All of that lets us use 1.75" x .095" tubing to bring down weight while maintaining superior strength, impact absorption, rigidity, and longevity. As a result, the CMS GT350 roll bar weighs just 52 lbs. despite using all 1-3/4" tubing for a beefy look befitting the GT500.
As an introductory offer, from now through October 17, Mustang6G members get $300 off a CMS Performance Roll Bar. You can PM us for details or give us a call at (844) 438-7244. Just mention you saw us on Mustang6G!
Here are a couple photos (in Race Red and Deep Impact Blue) to give you an idea (there are more at competitionmotorsport.com):
Sponsored