Foglight Delete

[rum_punch_ruby]

I have those V6 fog delete panels if you need them.

Please and thank you!

Sponsored

 

[Nagare]

Glad it worked out so well for you! How much are you selling for!= now!

 

[JOKER M1]

Glad it worked out so well for you! How much are you selling for!= now!

Thanks, I enjoyed doing this mod. I may do a few over the winter months but I haven’t discussed pricing yet.

 

[TheycallmeCC]

Thanks, I enjoyed doing this mod. I may do a few over the winter months but I haven’t discussed pricing yet.

Please let me know of you decide to make and sell a couple more.

 

[JOKER M1]

Just a couple finale pics of the foglight deletes after I finished the stripes

 

[rum_punch_ruby]

Is there enough plastic to attach the mesh if you also removed the center horizontal fin?

 

[JOKER M1]

Is there enough plastic to attach the mesh if you also removed the center horizontal fin?

Yes but this part may be tricky

 

[Trakhor]

I’m far enough along so I thought I would do a small write up on my foglight delete.

The inserts are for the V-6 car and I cut out everything but the divider. Tried multiple techniques until it was suggested by a couple forum members to use a body saw and paraffin wax to minimize the plastic melting. Once I removed the material I then used a dremel sanding barrel to clean up the edges. This is/was a messy and legenthy project but is well worth it.

Thank you for posting this. I was discussing this with a fellow member and just hadn't had a chance to pull the trigger. This looks better than anticipated!

 

[JOKER M1]

Thanks, it was a lot of work but worth the effort

Sponsored