What is the widest tire size you have used on your S550 Mustang? Share info & images

[MrWolf]

Lowered or stock?

Eibach Pro kit.

Sponsored

 

[HoustonGT]

Eibach Pro kit.

Thanks! Did you go 30's versus 35's on rears to avoid rub or for looks? Appreciate the info!

 

[MrWolf]

It’s not mine. If you look at post #139, it says it there

 

[HoustonGT]

Not much of a difference on BMR?
Check out this GT on 345/30 Rears. 19x11 Eibach Pro kit.

Paul, would 345/35's rub on this same setup?

 

[Need4SpeedMotors]

Paul, would 345/35's rub on this same setup?

You will be needing 345/30 to avoid rubbing or issues.

-Erick

 

[HoustonGT]

You will be needing 345/30 to avoid rubbing or issues.

-Erick

Erick, whats the widest xxx/35r19 that won't rub? Something on the sticky side like a nitto or toyo DOT radial? Thanks.

 

[Osiris]

Is there anything in here besides project 6g's super expensive wheels?

Edit: nvm I'm dumb didn't realize the person who created this thread is a seller of the wheels...

 

[Need4SpeedMotors]

Throw back Thursday! Feel free to share images of your widest setup!

Here is a 2018 Mustang GT running 19x10 285/35/19 Front and 19x11.5 345/30/19 Rear.

What do you think of this setup?

 

[2morrow]

Throw back Thursday! Feel free to share images of your widest setup!

Here is a 2018 Mustang GT running 19x10 285/35/19 Front and 19x11.5 345/30/19 Rear.

What do you think of this setup?

Looks Killer! Some blue accents like stripes or mirror covers would be tits. Might get too close to @ghostdriven 's ride though.

 

[Roh92cp]

I'll have some new pics of my setup in a couple weeks when I get my rear wheels back from WeldCraft. Niche Vinceza 20x10" 255/35 20 front 35 offset and rear after adding 2" will be 20x12" 35 offset with new size from Nitto G2's 315/30 20's. A bit of stretch on both front and back with this and the plan is to be tucked, and lowered on Sportlines.

I wanted to try the 325/30's Dunlop SP sport Maxx GT's as they have the right fit I like on a 12" wide wheel, but the ones I bought where 7 years old when they arrived, but sold new so they're going back. New Dunlops are $800 a tire and I'm not going there.

Here is what the Dunlops would have looked like on a 20x12" wheel.

 

[Need4SpeedMotors]

I'll have some new pics of my setup in a couple weeks when I get my rear wheels back from WeldCraft. Niche Vinceza 20x10" 255/35 20 front 35 offset and rear after adding 2" will be 20x12" 35 offset with new size from Nitto G2's 315/30 20's. A bit of stretch on both front and back with this and the plan is to be tucked, and lowered on Sportlines.

I wanted to try the 325/30's Dunlop SP sport Maxx GT's as they have the right fit I like on a 12" wide wheel, but the ones I bought where 7 years old when they arrived, but sold new so they're going back. New Dunlops are $800 a tire and I'm not going there.

Here is what the Dunlops would have looked like on a 20x12" wheel.

Talk about meaty!!! Thank you for sharing! Can't wait to see them on your Mustang.

 

[Need4SpeedMotors]

Happy Monday! What is the widest setup you are running?

Here is a 2016 Mustang GT running 19x10 285/35/19 Front and 19x11 345/30/19 Rear with the Project 6GR 5-FIVE wheels in two tone finish.

What do you think of this setup?

 

[Roh92cp]

Progress on my widened wheels 20x10 to 20x12" from wildcraft. As I had predicted and measured they fit perfect and clear everything easily. The widening is always done to the inside of the barrel so it's easy to figure out. With the suspension at full extension the wheels pokes out from the fender about 1/2" but that tucks in as the suspension goes down. I was only able to get it to compress so much without the tire on, but at that point the wheel is flush with fender and it will go in more when the full weight is on. Everything cleared great and thanks to the Steeda shock mount I have more than 1/4" clearance from wheel lip edge to mount, nothing else comes close.

 

[Roh92cp]

Tires came in early so I'll try and get them mounted Monday if possible. These Nitto 315/30 20 are a brand new size just came out this Nov. Nitto NT555 run wide compared to other brands, the Dunlop 325/30 I had returned because they were old stock are as wide as these 315/30's. Here are some pics and measurements of the tire and the widened 12" wheel. It looks like with the measurements theses tire should fit just a hint of stretch, but mounting well tell.

Wheels from Rim outer edge to edge 12 3/4"
Wheel inner beed seat 11 3/4"

Tire inner bead edge to edge 11 1/2"
Tire tread width 12"
Tire overall width 12 7/8"

 

[Memphisraines]

I’m running Steeda extreme drop springs on a PP 2017 Mustang GT what is the widest tire and wheel you think I would be able to run front and rear without rubbing in19” sizes. I just picked up a pair of mpss 285/35/19 I’m hoping to use up front. Can I go 10 or 11” up front and 11-11.5” rear and what size tire rear without rubbing and what offsets is recommended.

Sponsored