RTR Tech 5 10.5 x 20

[Cheezebandit]

did I read that right you had to run spacers to make these fit 20X 10.5 square set up?

Sponsored

 

[Stevdug]

did I read that right you had to run spacers to make these fit 20X 10.5 square set up?

Yes, on the front. Front and rear offsets are really different. OEM fronts are 10.5" with a 30mm, rear are 11"with a 62mm, the RTR are 10.5 with, I believe a 45mm offset. I didn't check to see if they would mount on the front without the spacer, but if they did they would be really recessed.

 

[SSF650]

Hey @Stevdug i was wondering if you can post a link to the spacers you bought for the front of your car to create that 10.5 square stance. I looked on americanmuscle.com , they only sell the 1’’ inch and the 1.50” inch spacer. They dont sell the 1.25” inch.
Thank you!

 

[Stevdug]

I ordered them from eBay from a seller called trailsportwheelspacers, he is still selling the same spacers and they are of good quality. Now the interesting part is without looking I would have said I got them from wheeladapter.com ran by a guy by the name of Fred Goeske who seems VERY serious about his product and his product gets really good ratings on the F150 forums. I don't remember why I did not get this set from him because I ran his spacers on my F150 and they were great. Main thing about the spacers is not to cheap out, you want to get good stuff and be safe.

Steve

 

[50 Deep]

More than a few GT350s have had issues with the wheels sticking out more on one side than the other. You will need to have the rear end alignment done. Not only for caster/camber, but also for locating the rear end side to side.

Sponsored