15 Mustang V6 Procharged Build ( Complete )

[MustangWarrior]

Good Morning,

I have been working on this build for 6-7 months and finally got it done and figured I would share with everyone out here.
The car is running a D1 Pro-charger kit with all the mods below. It was tuned by MPT tuning in FL and runs on E85. I have not dyno'd the car yet that will be done soon.

Enjoy!

D1 Procharger Kit 4.50 pulley 9-11 psi
Gates HD green belt
DW 90 lb injectors
Brisk 1 step colder plugs
170 Deg thermostat
Jlt Oil catch can
VMP fuel pump booster
Tial 50mm Bov
Race intercooler
Spectre intake filter and breather filter
Pro-sport Fuel pressure / Boost gauges
Shaftmasters Aluminum driveshaft
GT 80mm Throttle body
MMR Lightweight Waterpump pulley
MPT tunes ( E85 )
BBK LT headers
High flow cats
Mbrp resonators
SVE x pipe
Roush Axleback
Vogtland springs
Whiteline front endlinks
SVE 3 series wheels
Boomba tranny race mount
Boomba Short shifter
Boomba shifter bracket
GT350 rear axles
3.55 gears
Stop tech Brakes

Sponsored

 

[MustangWarrior]

Parts before Build!

 

[MustangWarrior]

Mid project!

 

[MustangWarrior]

All done!

View attachment 305741

 

[80FoxCoupe]

U know we want track and dyno results......

 

[MustangWarrior]

U know we want track and dyno results......

I am in the process to schedule the dyno and will post the sheets once I have them.

The strip however I will need to find time if they don't shut down before the year end here, I am sure they wont be super impressive for several reasons 1st being the tires I have, 2nd I still need to adjust to the power so driver mod will need fine tuned as well and the altitude I am told here is bad for drag racing in PA.

Sponsored