Trackspec GT4 center vent

[HISSMAN]

How am I just now seeing this!!! ???

Sponsored

 

[GTtreefiddy]

[MENTION=18099]XLR8EDMUSTANG[/MENTION] The vents look great. Do you have any pics from further away to get a better look at how they look aesthetically with the whole car?

 

[jrock]

if you contact TrackSpec they will send you new hardware. They had an issue with the supplier of the rivets and bolts but now have a corrosion resistant hardware kit.

I did contact TrackSpec and no response about replacing the rusted hardware.

 

[HISSMAN]

does anyone have any pics of this at a distance of further than 3 inches? LOL.

Also, on an OW mustang would be great!

 

[AlbertD]

does anyone have any pics of this at a distance of further than 3 inches? LOL.

Also, on an OW mustang would be great!

I took a few pics of my car and a buddies car with the center vents installed here in this thread...

https://www.mustang6g.com/forums/th...-mt-lemmon-trackspec-center-hood-vent.103919/

 

[HISSMAN]

Thanks! I am leaning harder and harder towards this.

 

[AlbertD]

Thanks! I am leaning harder and harder towards this.

If you track the car it is a must have in my opinion. Before the vent I would have to short shift the car around 6k rpm to keep the oil temp below the yellow on the factory gauge. After the vent, I can freely rev to 7k without having to worry about the temp at all. It stays consistently within the green now.

Also... you get added down force and the hood wobble at speed is completely gone.

 

[ddozier]

I have a few pics of mine on OW if you need more or particular angle let me know and I will shoot some more. I also added a matt finish vinyl to the leading edge to make it appear as far forward as the GT hood vents on the sides. Here is the progression.

Dave

 

[HISSMAN]

Damn that is sexy as hell and functional above all else. That is a hard combo to come by.

 

[Optimum Performance]

I did contact TrackSpec and no response about replacing the rusted hardware.

PM me your info and we can get it taken care of.

 

[HISSMAN]

I think this would really set off my car for a fall photoshoot I am having done. Then I will be ready to wheel the hell out of it this next spring and hopefully take on some longer sessions. Win..Win! I just need to get some funds in order. Thanks everyone!

 

[jrock]

PM me your info and we can get it taken care of.

PM Sent

 

[jrock]

Thanks @Optimum Performance. Trackspec did contact me. Everything is good now.

 

[hamzah596]

Has anyone put the new design on a whipple car? They come cut out in the center but not sure if it would fit a whipple.

 

[Optimum Performance]

Has anyone put the new design on a whipple car? They come cut out in the center but not sure if it would fit a whipple.

I have a couple of the notched centers in stock if you want to try it

Sponsored