SoCalTim
Member
- Thread starter
- #1
I purchased these brand new Vossen wheels to run an aggressive 20x10.5 square fitment with 305 rubber all around. My issue was they don’t clear the 6 piston Brembo Performance Pack brakes. Majorly frustrating.
With that said, these will FIT ANY NON-PERFORMANCE PACK MUSTANGS!
These are matte graphite with machined face, and look stunning on the car. Note the polished center caps are just sat on the wheels to show the installed look, they snap in and fit flush once installed, obviously.
A very small 8mm spacer provides adequate clearance on the front struts.
All 4 wheels are 20x10.5 with 45mm offset (makes it a rotatable tire set up). I will include the small 8mm hub centric spacers required for the front wheels.
-CV-5 were $650 per wheel, totaling $2600.
-Brand new 305/30/20 Nitto G2 Tires were $1050.
-Brand new Ford OEM TPMS sensors fitted inside. I also had shortie valve stems fitted to the TPMS to give them max clearance in the barrel.
-Brand new 8mm hubcentric spacers, included.
All tires are very recent 2018 production, never even touched the ground. One wheel was offered up to the front hub, and the brake issue presented itself. Expensive mistake on my part :headbonk:
Total mounted and balanced owes me $3900. That hurts to type :(
PRICE DROP ---> 1995 SHIPPED!! (THAT IS LESS THAN JUST THE BARE RIMS COST!!!)
Pics:
View attachment 291029
With that said, these will FIT ANY NON-PERFORMANCE PACK MUSTANGS!
These are matte graphite with machined face, and look stunning on the car. Note the polished center caps are just sat on the wheels to show the installed look, they snap in and fit flush once installed, obviously.
A very small 8mm spacer provides adequate clearance on the front struts.
All 4 wheels are 20x10.5 with 45mm offset (makes it a rotatable tire set up). I will include the small 8mm hub centric spacers required for the front wheels.
-CV-5 were $650 per wheel, totaling $2600.
-Brand new 305/30/20 Nitto G2 Tires were $1050.
-Brand new Ford OEM TPMS sensors fitted inside. I also had shortie valve stems fitted to the TPMS to give them max clearance in the barrel.
-Brand new 8mm hubcentric spacers, included.
All tires are very recent 2018 production, never even touched the ground. One wheel was offered up to the front hub, and the brake issue presented itself. Expensive mistake on my part :headbonk:
Total mounted and balanced owes me $3900. That hurts to type :(
PRICE DROP ---> 1995 SHIPPED!! (THAT IS LESS THAN JUST THE BARE RIMS COST!!!)
Pics:
View attachment 291029
Sponsored
Attachments
-
0 bytes Views: 0
Last edited: