Group Buy: DCTMS Carbon Fiber/Leather RS550 Steering Wheel

[Boston23]

Quick Update:



Those who ordered steering wheels with more than one color will see invoices a little sooner requesting a deposit. This is simply because if you back out before payment those custom colors will be difficult to offer to another customer. So watch out for those.

Even better for me! A couple hundred here and there goes a bit unnoticed

Sponsored

 

[Boomer350]

Thanks for organizing! Would like option 1 red / red if still open, please!

 

[GTthree50]

Your description says thicker grips. Is that just in the 9/3 0’clock grip area or to the overall diameter? One of the improvements I’d want in a wheel is a slightly larger diameter grip over the circumference of the wheel. Thanks!

 

[ewitz]

Shipping to Canada?

 

[Bender]

Screw it. I am in for Wheel #1 red stripe and stitching if there is still a spot open

 

[Inthehighdesert]

Still open? If so, option one, white and white.

 

[wilddog]

I’d like option 2 full leather with red stitching

 

[50 Deep]

Sorry, when I said OEM stitching color - I meant the silver/white stitching that's in the interior now.

To recap:
Option #1 - Dark Blue Stripe, silver/white stitching (stitching color #1 or #11 maybe?)

Looking forward to seeing a pic of the dark blue stripe

I sent you a PM. I am also looking forward to seeing the dark blue. I may make a change to my own to match the exterior of the car at some point down the line

Hi 50,

First thanks for putting this together for the community...the effort/time spent is much appreciated! Looks like a high quality product too.

Would DCTMS consider an Option 3 with CF top and bottom segments? I would be looking for this setup with red stripe at top + red stitching on the leather bits in the middle. I thought I saw a few members weigh in on liking a balanced CF look in one of these threads...maybe your build thread? If so is there a cost estimate?

Thanks again

I spoke to them about this, and that option is not available at this time. DCTMS has about 40k into the development of this current model, and want to get it into the hands of customers before they can R&D an additional design for the carbon fiber. It is something they have an interest in, but no time frame for when. I can get you in contact with them if you would like to pioneer the very first model though.

Option 2, white stitching.

PM sent!

Option 1, Red Center with white stitching, thanks.

Got you locked in man

Yeah, a leather stripe would be good. In that regard, feels like a downgrade if you have a 350 already.

I see your point, but that is only if you have an R. The standard 350 has no colored center stripe.

Please add me for option 1 red stitched

PM sent

Sign me up for option 2 with dark blue stitching. Thanks!

PM sent

 

[50 Deep]

I’d like option 2 full leather with red stitching

PM sent

Still open? If so, option one, white and white.

Still open, and PM sent

Screw it. I am in for Wheel #1 red stripe and stitching if there is still a spot open

YES!! PM sent

Shipping to Canada?

Shipping to Canada will work. You will just see a small increase in the shipping.

Your description says thicker grips. Is that just in the 9/3 0’clock grip area or to the overall diameter? One of the improvements I’d want in a wheel is a slightly larger diameter grip over the circumference of the wheel. Thanks!

Thicker all around for her pleasure

Thanks for organizing! Would like option 1 red / red if still open, please!

PM sent your way

 

[livewire2003]

Put me down for option 1 with the red stripe.

 

[GTthree50]

I replied in the other thread but in case please put me down for option 2 with white stitching. Thank you.

 

[50 Deep]

Put me down for option 1 with the red stripe.

I replied in the other thread but in case please put me down for option 2 with white stitching. Thank you.

PM’s sent gents.... we are getting close to capacity on option 1

 

[50 Deep]

With the knowledge of the OEM GT350 stitching color being gray I am gong to ask about that for you guys. Can someone post a picture of that please.

 

[Ven0r]

I'm in for option 1, red stitching and red center stripe.

 

[Boston23]

With the knowledge of the OEM GT350 stitching color being gray I am gong to ask about that for you guys. Can someone post a picture of that please.

That would be awesome and what I was leaning towards early on. I'm not by my car, otherwise I'd get you a picture now.

Sponsored