GT350 Intake Dyno..ENJOY!

[Speedwagon]

The part number on the box from ford for the tb is

GR3Z-9E926-A

Looks like you can get it here ... http://parts.autonationfordwhitebearlake.com/oe-ford/gr3z9e926a

$113 isnt bad at all

Sponsored

 

[Silver50Pony]

I just bought a 2016 GT S550 so Im all ears.. Thanks for posting this! :cheers::cheers:

You WONT be disappointed in this setup just saying man. The gt350 intake and lund flex fuel makes this car a whole different car.

 

[Speedwagon]

Might be a good idea to throw out a list of parts and part #'s and where is best place to purchase.. If it hasnt already been done ...Thanks!

 

[armykyle1 [HACKED ACCOUNT]

Can anyone post some 5th gear pulls with the mani and LTs?

 

[Infamous]

Are there any install guides on this? Besides the one that is ~$75? Thanks!

 

[Supa LA]

Can anyone post some 5th gear pulls with the mani and LTs?

SOON.

 

[sandeale]

I thought I posted the updated Dyno sheet here, but apparently not.....photobucket is currently acting up but on the same tune and dyno as before, only change being longtubes, the car put down 445 hp....I'll post the sheet asap as well as an updated Dyno on my current tune revision

 

[Petroleum Jesus]

I thought I posted the updated Dyno sheet here, but apparently not.....photobucket is currently acting up but on the same tune and dyno as before, only change being longtubes, the car put down 445 hp....I'll post the sheet asap as well as an updated Dyno on my current tune revision

Is that on Gas or Ethanol?

 

[GSLSE20B]

Are there any install guides on this? Besides the one that is ~$75? Thanks!

You don't need anything special for the install . 3 6mm bolts and everything else is already included

 

[WhiteyDog]

Can anyone post some 5th gear pulls with the mani and LTs?

Like Sandeale, my numbers are right in the neighborhood as what he posted. My 5th gear pulls were with Kook's headers, MBRP 3" street, 350IM, Lund 93 tune and stock 80mm TB with MMR adapter.

 

[sandeale]

93 octane...Im waiting for a local station to start supplying e85...the store owner polled local shops and folks at the drag strip and now plans to install an e85 tank

FWIW I'm running pypes stepped catted headers, and still on the stock (ported) throttle body

 

[Terminator2]

Can anyone post some 5th gear pulls with the mani and LTs?

I will once I get my manifold and bigger injectors. I have a local dyno I've used in the past. I'll go from 1500 in 5th until I hit 182mph because ECM limit hp tuners cannot remove.

 

[GSLSE20B]

I will once I get my manifold and bigger injectors. I have a local dyno I've used in the past. I'll go from 1500 in 5th until I hit 182mph because ECM limit hp tuners cannot remove.

Trick it with the gear ratio

 

[4V Mayhem]

Am I seeing this correct? The stock GT TB made 30 ft/lbs more tq and only 6 less hp than the GT350 TB? Along with having a longer and higher curve? Is that correct or am I reading it wrong?

 

[Dominant1]

Your reading it wrong no tb can give you 30ft lbs of torque...a properly tuned gt-350 tb can net you 10 rwhp and 6 ftlbs of torque!

Sponsored