Firewall hole for wiring

[sammylew34]

Does anyone know where there is a hole in the firewall in the front of the car for wiring?

Sponsored

 

[icormba]

Does anyone know where there is a hole in the firewall in the front of the car for wiring?

I'm guessing it might be in the same location on all G6 Mustangs. Maybe try the electronic forum? Might be some answers there.

 

[Anthony@HTM]

There is one behind the gas pedal, not sure how close it is to the headers

 

[Helmet]

Are you running wire for an amp?

 

[sammylew34]

Are you running wire for an amp?

Running wiring for a cooler pump.

 

[Screamer]

Running wiring for a cooler pump.[/QUOTE

I just did this. I searched for an hour and this is what i did. Behind the right inner fender on the firewall is a big rubber boot with a main harness running through the firewall. From the inside I drilled a 9/16 hole 2" left of the boot, Put a grommet there . I also jacketed the wires full length with 3/16 and then 1/2" heat shrink.

I used used a std RB pump, OEM cooler, brackets and duct.

 

[mmakam2]

Which panels is that grommet under? I would LOVE a picture.

 

[law242]

you have holes on both sides, I ran my sub power wire from the passenger side and it went well.

Sponsored