HOW TO: Add MyFord Touch/Sync 3 to base model S550

[OEMRadio]

So that applies to the '15 and 16 base radios correct? I still havent fully made up my mind if I am going base or premium but you will be my first contact if I go base

Yes sir.. the base radios are the same for both.. Thanks I look forward to helping you out..

Sponsored

 

[pinero61]

So my 2015 mustang sync2 kit is up for grabs. It includes the following

Nav enabled apim/screen
Mft Bezel with toggles
Premium acm
Sd reader/media hub for console

You will need a harness to go from the hub to the apim. I never got around to making one. I just drove around without nav.

$700+shipping

Where'd you find you S3 setup?

 

[aggieStang]

Where'd you find you S3 setup?

Ebay. Some guy had it mislabeled as a mft sync2.

 

[Jesse R]

Ebay. Some guy had it mislabeled as a mft sync2.

Sent you a pm about the sale

 

[zackmd1]

Brackets are now available!

https://www.shapeways.com/product/S...brackets?key=1315ae73abdf85e4154668ff49b9bd56

 

[jmr061]

Brackets are now available!

https://www.shapeways.com/product/S...brackets?key=1315ae73abdf85e4154668ff49b9bd56

Just as an FYI there are two designs of the MFT/SYNC2 screen. Your brackets will only work with one of them. That would be the one that has a completely flat side.

 

[zackmd1]

Just as an FYI there are two designs of the MFT/SYNC2 screen. Your brackets will only work with one of them. That would be the one that has a completely flat side.

These are for the escape APIM design. I have no way to design for the second APIM unless I can get accurate pictures and dimensions.

 

[jmr061]

These are for the escape APIM design. I have no way to design for the second APIM unless I can get accurate pictures and dimensions.

If you want one let me know. I can send one. Just email me. The APIMS aren't different...it's the screen.

 

[OEMRadio]

Great job Zack.. And glad my measurements were right ha ha .. I'm an amateur with a caliper

 

[zackmd1]

Brackets installed in my vehicle...

 

[OEMRadio]

Brackets installed in my vehicle...

Can't get any better than that

 

[DFWStangGuy]

So what total price would I be at to go from the 4" screen to the 8"MFT with HD radio? I'm a little confused by all of the options available.

 

[OEMRadio]

So what total price would I be at to go from the 4" screen to the 8"MFT with HD radio? I'm a little confused by all of the options available.

I'll send you a pm

 

[OEMRadio]

This is a "Production" harness.. I made some corrections.. and fine tuned it.. and this is what they will look like from now on..

 

[R2 AUTO]

Finally, I was waiting for this. I bought the OEM screen and a bezel out of a GT350 before the red button was available...might be time to get this thing installed with this harness! LOL where can I buy this!!??

Sponsored