Recent content by VMS Racing

A 15" wheel will not clear the calipers.

TTT

I would drive it. The ideal thing here would be for the dealer to actually find the cause of the PO300 code and fix it and you can then decide if you want to keep the car or sell it. Here are a couple of good videos on cylinder wall scoring, which is typical is some Porsche engines. They usually...

I probably should not comment on this as a vendor, but I cannot stay quiet on this. A PO300 code is just a random or multiple cylinder misfire. Almost every single engine I have ever disassembled or seen disassembled had similar scratches on the cylinder walls, it is very common. If you have any...

You're most welcome and thank you for the order :cool:

We do not have beadlock options on the Modulo or Blackhawk. I can get you a deal on the V-Star Beadlocks if you need a beadlock wheels, PM me if interested and I will make you a discount code.

Just apply the discount code MF6OS to a pair of the rear wheels: Rear 17x10 Modulo Rear 17x10 Blackhawk

Do you want the Modulo or the Blackhawk?

We have an overstock sale on the Blackhawk and Modulo 17x10's: VMS Sale Blackhawk Modulo 17x10 and 18x5

The sale price will end when we start running out of stock, but that is still a long way away. You need 60 degree conical lug nuts that can be installed with a 19mm socket, the OEM lug nut that is installed with a 22mm socket is too wide for our wheels, the socket will not go into the lug nut...

For the front on the 18x5 wheel you would usually use the Mickey Thompson Sportsman S/R in 28x6.00R18 with the 305/40R17 drag radials. The issue with the 315/35R17 is that is a short tire, it is only 25.6" in diameter and the 28x6.00R18 is 28" in diameter. You would need to use the Sportsman S/R...

VMS Racing 17x10 Modulo

Yes, you can run the 17's in the back with the 19's in the front. Please be aware that there will be a difference in how the car handles. Drag Radials will not corner like your usual 19 inch street tire.

Yes, they will fit. The Mach 1 uses the PP brakes, so no issues there.

We have our Modulo and Blackhawk drag pack wheels on sale. We are way overstocked on them. $795 for all four wheels, two 17x10's and two 18x5's. If you just want the 17x10's they would be $217.46 each with the discount code. We have a thread on the sale here: VMS Racing drag pack over stock sale...