Wow!!! thanks a million, I went back to the manual and saw the step you mentioned, that I missed. I definitely would've have seeked out experienced help with this but I'm currently supporting the US military in Germany. Thanks again for the help!!!
I could use some help if anyone has any ideas of what I may be doing wrong. The car is procharged. Any help or advice would be greatly appreciated.
During a burnout attempt, I over rev’d the motor. I don't know how high it rev'd but it was well past 8k. Shortly after the incident, white...
Thank you!! Currently It's at the 2.5-5.5 WOT stage of the Lund tune process. I ran out of time and having my friend help me out.
Still needs:
Airlift height senors installed.
Four wheel alignment.
Some reason I'm getting the low brake fluid light coming on/off intermittently. Gotta...
D1SC install
D1SC install. Destroyed the first belt by not setting the tension properly. Second belt installed worked great after adjusting the tension. Working with Lund finishing the tune.
Rear suspension/differential/axles
Almost everything in the rear back in. Differential came out and replaced because of improper back lash. 3:73 gears were removed for 3:31. I ended up having to buy a loaded 3:55 differential without Torsen to get this thing moving. Gonna send the Torsen 3:31...
Front bag install
Front bag install. After getting the wheels on, front wheels would not spin. As shown below material had to be removed from the lock collar along with the addition of a 1/4" spacer to allow the MRR M350 wheels to clear. The spacer limits the drop height so I'm going to look at...
Tear Down
I didn't have a chance to post these while on vacation in the states. I've returned to Saudi for a couple weeks then relocating to Germany. Here's the tear down. I spent a total of about a week and half working on the car.
Exhaust out
Rear suspension out
Front suspension...