Recent content by RenegadeRedneck

There's E85 in Calgary and you can get drums delivered just about anywhere.

Yeah, we received 30cm or so in Calgary, around 55-60 down south. Lowest I saw was - 9 at the house.

Change over this month. It's getting too cold overnight to keep running summers for much longer. The summers will flat spot while parked and the ride will be shit until you get heat in them which takes longer and longer. I'd rather put extra wear on my winters for the few days left in the year...

I'm have Nokians in the stock PP1 sizes. They are excellent in the snow, last winter I didn't even have to put weight in the trunk. On dry or wet asphalt they are crap. If you live somewhere where it snows a lot then Nokians are good, if it's mostly just cold with a mild/moderate amount of snow...

Yup, when you buy the flex you get all 3. At least that's what I received.

The flex tune will work on 91. When you order a flex from Lund they will send you a 91/93 base tune to make sure your stft's are good. You data log that, if all is well they send you a flex and E85r tune. My flex and E85r tunes made basically identical numbers(1whp and 1wtq). Where the e85 tune...

Stainless Works Redline with an H.

That's not too loud at all. I like it.

For those of you who've jumped into the deep end of 18+ exhausts, how loud are catted long tubes with an active catback(stainless works, borla, corsa) in quiet mode(cold starts, idle) ? I can't find a decent comparison video or any meaningful info. How loud is it compared to say the stock active...

P111SC look sick.

The FG-08 are now officially my favourite wheel design.

The 10R80 only skips under part throttle on the upshift. Under wot it hits every gear. On down shifts it will do 10->7 under half throttle and 10->4 under wot. If you get wheel spin it will skip up instead of applying brakes or cutting timing. The only way a tune to hit every gear in D all the...

What's the difference between this and just putting the transmission in S?

Can't speak to the numbers but a 2018 mt82 is 1:1 in 4th, not 5th like previous years.

Aren't Borla cat backs 3" while the axle backs are stock size piping ?