Recent content by MM777

I'm in

For me it was the wheel bearing and thrust washer at the end of the Left half shaft (it sits against the wheel bearing which incorporates the ABS Tone ring). The computer shut down my ABS, Hill-start assist power steering and the engine started to drop revs on acceleration.

Hey WD, it’s all clear, I put gear oil on before giving it a go, it looks easier on YouTube

I’m having issues getting the GT350 half shaft (FR3Z-4K139-H,Left side or passenger side of my RHD mustang) into the diff, it won’t push in. Has anyone had the same problem?

Hey WItoTX, yes to both airbag light and sloppy wheel bearings, which I replaced. I also put in a set of GT350 shafts and upgraded the vertical link & LC bearing while the car was apart. It’s worth noting that most of the bolts are single use according to Ford, so include those if you’re doing...

I had the same problem. For me it was the left REAR wheel bearing and thrust washer on the axle was worn , see pic, blue one is the new thrust washer. The worn thrust washer interferes with the signal from the tone ring to the ABS sensor. In turn power steering, cruise and hill start assist shut...

Hi Don, I used the Boomba Racing sound tube delete kit. [ MUSTANG GT SOUND TUBE DELETE - Boomba Racing, Inc. ] but I'm sure you could improvise with bits from Bunnings. Fortunately I have the hands of a 5yo child & was able to get the 10mm nut off holding the soundtube to the firewall, aside...

They look fantastic. Where did you source your Ford Performance wheels from?

Thanks Todd, I'll give this a go tonight.

I would be very interested to hear the outcome after you visit the dealer...hopefully it is a simple fix.

I have the same issue in a factory sync3 system. Has anyone found a solution yet?

When I start driving the Sat Nav shows an incorrect position (sometimes by several km's) or my car is travelling backwards on the screen (or both). It doesn't matter if I am using WAZE on Apple Car-play either, it's still craptacular. Often it will correct after driving for 30min or so. Has...

It looks like the R-Spec's wheels are from The 2020 EcoBoost High Performance package offered in the US. Due to wider rims & offset, the PP2 wheels stick out too far beyond the front guards for ADR compliance.

Hi SpeedySouthPaw What Brand is the Driveshaft?

Any chance there is a part number/ price available for this?