Recent content by ISC Suspension

Installation Guide: 12th down from the top http://iscsuspension-na.com/install/ 2015+ F026 Ford Mustang · Remove Wheels, lugnuts are 21mm · FRONT · Remove ABS wire from the strut, it is a plastic clip · Remove swaybar endlink from sway bar. It is...

It may be possible to implement a "ultra low" kit in the future to accommodate that, with shorter springs, etc. We would have to make it a different part number so both options would be available for people. I forgot to ask initially (which to some extent is irrelevant now) when you were...

As you know I have limited information and data on what you were doing with your set, so I apologize if it appeared I was stating otherwise. You are correct that the generic description of 3 inches for our products may not be possible on the sport pack mustang. That description was overlooked...

So there are the options, the street comfort, the street sport, and the track/race. The street comfort and street sport share the same spring rate, but have different valving. The valving range for street comfort and street sport have about a 30% overlap. The track race is much more drastic, for...

Sure thing! Thank you for the kind words. It really depends on the ride height you are aiming for with these cars. Note the images we posted. We probably had another .5 in the rear to 1 inch in the front more available for drop, but we opted against it due to the goals that customer had...

This is not an issue limited to ISC or the Mustang. Depending on the wheel used and the vehicle suspension geometry fitment implications can happen if ride height is brought down to far. On the Mustang we suggest anywhere from stock height to lowered around 2 inches, similar to the images we...

no problem sorry for the inconvenience

If it was a direct order (from ISC) it is 7-15 business days. The rear springs caused some implications with that. Feel free to PM me your number I can give you a call if you would like.

Hey everyone. I wanted to chime in here as this thread was brought to my attention. When we finally finished development of these kits (which took about 1 year) we placed a small stocking order to have them produced. We underestimated the demand on these significantly. Kits were 6-8 weeks out...