Recent content by Crispy

That's interesting because from my understanding all RHD cars where built exactly the same. So maybe AU cars have the hardware and we just need to enable it? (I could be wrong and idk how to check for the hardware). My guess would be APIM (for the touch screen button) FCIM maybe for climate...

I don't think our cars came with the hardware for heated steering wheel. You will likely need a new steering wheel and a heated steering wheel module. I briefly googled it once and it seems like it's possible. I just wasnt that interested in doing it at the time.

I went back into forscan a while ago and also enabled remote start settings in the APIM (head unit) i dont think this did anything because the behaviour didnt change and no new settings appear in the head unit settings. I also enabled another setting in the bdyCM module. i cant remember the...

Yep just AliExpress key. No other hardware needed. The buttons are not reversed on mine. This might be an issue with the other posters key specifically. The buttons are in different spots on the key but they work as shown.

I have the EPM 3A3R kit too and I personally haven't had any issues with it switching modes on me. I'm guessing something went hay wire in the BCM and rapidly flicked the light switch enough to change the mode. But you should know that once its all setup correctly you shouldn't need to worry...

Yep. I ended up with going for a cheaper easier method. I wrote a post about here https://www.mustang6g.com/forums/threads/how-to-add-factory-remote-start-to-your-au-eu-uk-mustang.222766/

I also had a 3 key issue with my car. I had 2 keys with the car but 3 paired and I couldn't get the 4th key to pair. When I took my car in for a service I just asked the dealership to clear and re-pair my 2 keys (it cost me $120 I think?) and after that they key pairing procedure I listed above...

Yep. I have a 2019 GT and this is exactly what I did. New key + Forscan and that's it. It's low risk because even if it doesn't work your old keys will still work just fine.

I did this 9 months ago so if this has already been covered in another thread then sorry. also sorry if the detail is lacking but when i went looking online i couldn't find much info about what exactly needed changing in the car so i hope this helps someone. What you will need Forscan with a...

This looks great! I've been looking into adding an oil pressure sensor to my RHD mustang. All our cars are the same spec PP1 and premium pack. But missing a few things like the oil pressure sensor is replaced with an oil pressure switch. There is probably some differences with the GEN3 motors...

I reached out to some places in AUS that were previously offering kits for $1300+ but they were no longer selling them. i tired reaching out to people over seas offering similar kits but they didnt seem interested in dealing with someone over seas. so i made it my mission to figure it out and...

Your old keys will still work after this. so you only really need to buy 1 new key and keep the rest spare. I wont go over how to use Forscan but its pretty straight forward. you can find some guides online that go over how to programme modules/modify AS-BUILT data with it. What you will need...

i bought the 2 keys and RTM for this and was following the step by step guide linked. i cant get the 2 new keys to program to the car using the backup slot procedure. im guessing its because my car still has the 433Mhz keys and antenna so it cant see the new 902Mhz key. how did you get your...