Sponsored

Recent content by cop on my back

  1. Wife and I take Mustangs to Area 27

    Thanks

  2. Wife and I take Mustangs to Area 27

  3. New Mach 1 Owner 🇨🇦

    Its a great car, but I could never have a garage queen. If you could track it one day just to feel what the car can do you might change your mind. That said, to each their own. That is a cool colour, I have not seen one in the flesh yet.

  4. OEM Side Stripe Replacement

    Yea they are pricey. I had to get my front fender repainted due to someone dropping a rock off an overpass. You have to buy all 3 side stripes, I only needed the short one on the fender. They were $750 Canadian from the dealer. The good thing is, I got to keep the other 2 incase I need them...

  5. Change Oil Soon Message after 6 mths/6000 miles

    I drive around 2500kms a year and after 7 months of storage I get the message. Time also plays a big role.

  6. Fixed my IMRC (intake manifold runner control) failure!!! Cost nearly nothing.

    So I had the notorious IMRC failure on my 2015 Mustang GT. I figured it could be fixed and I did it. I put together a YouTube video on the repair. 2015-2017 Mustang GT IMRC Part 2

  7. 2023 Mach 1 --> Steering wheel BOLT??? Not 24mm but T-50 TORX head..........

    News to me...Mine was 24mm as was my 2015

  8. 2022 MACH 1 will a universal tow hook actually fit? Thread pitch universal?

    Yes, they are a left hand thread.

  9. Custom steering wheel is done!

    See pictures.

  10. Custom steering wheel is done!

    Yes, didn’t like my factory steering wheel in my 2022 Mach 1 so getting it modified. Will post pictures and a YouTube video of the finished product soon. Currently at Barrett Jackson taking in all the sights. Sorry just a teaser for now, but working with the company to potentially offer deals to...

  11. Clutch partially blown?

    No, that was in my 2015 GT. Mach 1 is doing fine.

  12. Does your Mach 1 Shudder in 6th gear, below 2000 RPM

    Mine does it. It is not lugging the engine, I know what that is, I do in my Ranger sometimes. My 2015 GT doesn't do it at the same low RPM, the Mach 1 does. I just avoid that RPM in 6th now.

  13. On Track High Speed Vibrations 22Mach1 HP A10

    Is a higher frequency vibration? Could very well be the driveshaft out of balance.

  14. RT660 autocross tire pressures

    I just ran a new set of RT 660 on my Mach 1 at Area 27, and they did very well IMO. It was hot, track temp was 59C (139F). Even in the heat I was able to get 1.4g in the corners. They performed just like the Sport Cup 2s but didn't wear like they did. Now for autocross, that is a different...

  15. Track Decals

    I don't have that many tracks in my entire country. Well done!
See more





Top