I get about 13MPG on E 85 but I'm N/A. About a 50/50 split of city and highway and I usually do a 3/4 to full throttle pull getting on the highway every day. With you being boosted I don't think 6MPG is out of the ordinary. All comes down to how you drive, but I'm not sure.
I have noticed my...
I regret getting rid of the Cup 2's on my PP2. I got a second set around 9-10k miles when the factory ones wore out. I switched to Conti Extreme Contacts. The car is much more friendly in the rain and tramlining is non existent, but during spirited driving with the Cup 2's, the car just bit into...
To be clear sitting for a while for me is storing it for 5 months over the winter.
Cold cranking is about 300 or so RPM with no combustion forces being applied anywhere. Firing up the engine results in about a 2000 RPM spike and big combustion forces being directed at various journals and...
For peace of mind after the car sits for a while, I'll build up the oil pressure before I start it. To do this, hold the gas pedal to the floor, then press the start button while keeping the pedal down. It'll turn over for about 8 seconds and stop. If the oil pressure hasn't increased, release...
Almost all Bullitt specific parts start with KR3Z as their prefix. Normal mustang parts start with JR3Z.
S550 Special Edition Part Numbers - Google Sheets
Only thing missing is Safe and Smart package which IMO is a good thing. Not a fan of active cruise.
Ford Safe and Smart™ Package
• Adaptive Cruise Control
• Auto High Beam
• Lane-Keeping System (Includes: Lane-Keeping Alert, LaneKeeping Assist and Driver Alert
• Pre-Collision Assist with...
$799 is a bit steep for something I would probably only use a handful of times. They are local to me though so I'm going to contact them and see if they could help! Thanks!
I was wondering if anyone has or has access to a 3D model of the 18+ hood vents. I would like to design and 3D print my own set of vents, but my skills are not up to par to render them from scratch. I may even have to develop my skills a little further to get them how I'd like, but I'll cross...
Also I gotta say Chapman is great! I ordered my PP2 from them and the process was flawless. If they still offer the wheel and tire protection through Allstate, get it. I got the one with accidental damage meaning if I curb a wheel they repair or replace it for free. I've had 3 punctures and got...
I live in South Jersey and have a PP2. I was curious about the temp limits, and I emailed Michelin about it and they sent me this bulletin on this post. They said they do not recommend driving on the tire under any circumstance when ambient temps are below 40 degrees Fahrenheit...
If you have access to the car or can get a picture of it, check the manufacturer and tire info sticker in the drivers door. It'll have 305/30ZR19 98Y listed as the tire size for all 4 tires. PP2's are the only ones that came with that size from the factory besides Mach 1 handling pack cars.