Sponsored
1 old racer's latest activity
-
1 old racer replied to the thread Tow hook.https://www.ebay.com/itm/224591039982?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=iN9FTWpfTSy&sssrc=4429486&ssuid=vc9PQwX4QX-&var=&wid... -
1 old racer replied to the thread Tow hook.Spliced into the stock connector
-
1 old racer replied to the thread Tow hook.ford performance both ends and like John i hve some l.e.d.'s as rev. lights.
-
-
1 old racer replied to the thread Upgraded to factory Recaro seats - Now have Air Bag light.Don't think so
-
1 old racer replied to the thread Upgraded to factory Recaro seats - Now have Air Bag light.'yes, you must use the air bladder that is on your std seats.
-
1 old racer reacted to EFI's post in the thread How do you no-trailer guys handle the logistics of a breakdown at the track? with
Like.
Called a tow truck and got a ride back home from a friend that attended with me. Another time I drove my friend's trailered car home... -
1 old racer replied to the thread Anyone use a Quickjack 5000SLX sideways?.I have not done it on my S550 but have done it on two other cars over the past 4 to 5 years. I just made sure the jack was placed as far...
-
The 2018+ decklid panel is more susceptible to marring than the prior 2015-17 panels. Here's a DIY thread I put together a while ago...
-
1 old racer reacted to EuroKllr's post in the thread What is a towing capacity to shoot for to drag the GT350 around? with Like.
The weight of my trailer fully loaded with my GT350 and all my gear is about 6,000lbs. I have a general rule to never go over more than...
-
1 old racer reacted to HKusp's post in the thread What did you do to your S550 Mustang today?! with Like.
Pics, or it didn't happen.
-
1 old racer reacted to cop on my back's post in the thread Ordered a Watson 4 point roll bar with Like.
Getting closer.
-
1 old racer replied to the thread Seat delete with access door to the trunk..I had a seat delete from Watson, that I got when I installed my Watson roll bar. The concept in actually simple. I used the Watson back...
-
I did not use a nut on the back. The impact bar is very hard metal and difficult to drill. I tapped the hole for threads and used a...
-
1 old racer replied to the thread Ordered a Watson 4 point roll bar.Now that is cool!!!!
-
1 old racer reacted to cop on my back's post in the thread Ordered a Watson 4 point roll bar with Like.
Bar is painted. Needs a few touch ups.
