What did you do to your S550 Mustang today?!

HoosierDaddy · Mar 22, 2018

Snook66 said:
I paid $75 to have my Roush AB installed, it is perfectly centered, looks factory.
Then again, this shop has been in business for over 40 years.

Sounds reasonable. Think they make house calls to AZ? LoL

1blkpny · Mar 22, 2018

Went for a drive tonight and as I was pulling out of the garage, noticed my windshield right where the rear view mirror is, was cracked in 3 directions. 1 is straight up,1 to the left and 1 to the right. No rock chips either. Not a mark. Just cracked. Weird.

JOKER M1 · Mar 22, 2018

1blkpny said:
Went for a drive tonight and as I was pulling out of the garage, noticed my windshield right where the rear view mirror is, was cracked in 3 directions. 1 is straight up,1 to the left and 1 to the right. No rock chips either. Not a mark. Just cracked. Weird.

Dang, not cool. Sorry to hear that

BradleyMac · Mar 22, 2018

tukn20s said:
Just picked her up from getting the FP PP2 installed. What a difference.

Please elaborate on your expression "what a difference". I'm considering also purchasing the PP2 vrs the Livernois Tune. Thanks.

Cobraracer79 · Mar 22, 2018

A Few things done:
BMR IRS Cradle Lockout CBOO5H
BMR Front Subframe Chassis Brace
BMR Sway bar Set SBO43R
BMR Super Low Profile Chassis Jacking Rails CJROO2H
Schroth QuickFit Harness SR 17110
Steeda S550 Mustang Camber Plates 555 8139
Steeda S550 Mustang Rear Adjustable Camber Arms 555 4123
BC Forged RS31 19x10.5
BC Forged RS31 19x11.5
Bridgestone RE-71 305/30/19

Houston Kid · Mar 22, 2018

mvfjet said:
Sounds good and the tips look good! How much for the axleback?

Got them from Steeda for about $1,200 but I ordered a bunch of stuff and received a friendly forum discount.

Houston Kid · Mar 22, 2018

After exhaust, I prepped and painted the rotors. No nasty looking rusty centers for me.

HoosierDaddy · Mar 22, 2018

Houston Kid said:
After exhaust, I prepped and painted the rotors. No nasty looking rusty centers for me.

Should have hung them close together for the ultimate wind chimes.

lazarus870 · Mar 23, 2018

Took it out for a drive. I have been getting annoyed with it driving in heavy stop and go traffic to work. So I take my Corolla to work and leave the 5.0 for evenings/weekends. Took it out for a nighttime drive here. It's cold at about 38 degrees F, so I couldn't punch it as I could feel the car breaking loose even with just a bit of gassin' it, but it was nice.

If you ever complain about your gas prices, right now in Vancouver, Canada gas is 5.85 a gallon for 87 octane. I think about 6.43 for 91?
Highest prices in North America currently due to insane tax, and some other crap.

Prabzez_5.0 · Mar 23, 2018

lazarus870 said:
Took it out for a drive. I have been getting annoyed with it driving in heavy stop and go traffic to work. So I take my Corolla to work and leave the 5.0 for evenings/weekends. Took it out for a nighttime drive here. It's cold at about 38 degrees F, so I couldn't punch it as I could feel the car breaking loose even with just a bit of gassin' it, but it was nice.

If you ever complain about your gas prices, right now in Vancouver, Canada gas is 5.85 a gallon for 87 octane. I think about 6.43 for 91?
Highest prices in North America currently due to insane tax, and some other crap.

That's why I've been filling up gas exclusively from across the border for the past year, so much money saved.
Gas is ridiculous in Vancouver because Alberta is to blame, we need to be buying our gas from the U.S. instead.

Endokendal · Mar 23, 2018

Got my 2018 GT and traded in my 2015! So excited!

Also learned the hard way the 2018 steering wheel is not the same as the 2015 (air bag alignment holes are different) after trying to swap on my custom 2015 wheel.

And the MMR hood prop rods from 2015 also do not fit the 2018 hood.

Small bummers but don’t kill my buzz on the fantastic new car!

tukn20s · Mar 23, 2018

BradleyMac said:
Please elaborate on your expression "what a difference". I'm considering also purchasing the PP2 vrs the Livernois Tune. Thanks.

the responsiveness of the pedal. you can feel the torque at the low end and mid range. it is just FASTER..

gameovergt · Mar 23, 2018

Dr. ColorChip kit just came in, gonna fix the hood.

2morrow · Mar 23, 2018

Cobraracer79 said:
A Few things done:
BMR IRS Cradle Lockout CBOO5H
BMR Front Subframe Chassis Brace
BMR Sway bar Set SBO43R
BMR Super Low Profile Chassis Jacking Rails CJROO2H
Schroth QuickFit Harness SR 17110
Steeda S550 Mustang Camber Plates 555 8139
Steeda S550 Mustang Rear Adjustable Camber Arms 555 4123
BC Forged RS31 19x10.5
BC Forged RS31 19x11.5
Bridgestone RE-71 305/30/19

That’s a nice upgrade, Props! :thumbsup:

Sounds like someone might be looking at track dates…

What did you do to your S550 Mustang today?!

HoosierDaddy

Well-Known Member

1blkpny

Well-Known Member

JOKER M1

Well-Known Member

BradleyMac

Well-Known Member

Cobraracer79

Well-Known Member

Houston Kid

Well-Known Member

Houston Kid

Well-Known Member

HoosierDaddy

Well-Known Member

lazarus870

Well-Known Member

Prabzez_5.0

Well-Known Member

Endokendal

Well-Known Member

tukn20s

Well-Known Member

gameovergt

Kevin

2morrow

DesignR/DriveR/RiceEatR