What did you do to your S550 Mustang today?!

Got an AWE Touring Catback installed yesterday at AWE's facility. Facility is beautiful, BTW.

At first, I thought to myself, "Oh god, what have I done." It is LOUD. Plus, my baby isn't stock anymore.

Then when I down shifted, I realized why I got the exhaust in the first place. Goose bumps. Putting my foot down gets the heart rate going. I suppose the noise at idle and regular driving I will have to get used to, but goddamn my girl can sing now.

Actually the other day...Took some pictures.

Rerouted the dash cam power cable to keep it mostly out of sight.

Got an oil/filter change. Full synthetic. Good for the next 5,000 miles.

Today, I dropped my Ecoboost off at Next Level Performance Solutions to finally get the Ford ProCal tune and CAI, Garrett intercooler and NGK sparkplugs that I had bought a few weeks ago, installed. It will be ready to go tomorrow. I'm interested to see how much difference it makes.

I picked up my 2019 last week and took it straight to a detail shop for Suntek and ceramic coating. Also changed out the stock clutch spring for the Steeda. What a great difference.

Pictures in the photo thread.

Next up is Steeda jacking rails and ZL1 splash guards.

Installed a GT350 steering wheel. A little hard to find for a 2018 but when I did I grabbed it. Thanks Carbon Addict I love the Wheel.

Finally installed the MBRP Street catback with my son about two weeks ago. Oh what a difference!!

Finished a speaker upgrade in the doors of my 18. Sealed up the doors and deadened a bit. Installed Scanspeak 10F/4424 mid and 18W/4434 woofer. Big improvement in clarity, better mid-range and bass response.

Probably post a thread with more pics in the infotainment/audio forum when I have the time.

Full weekly clean, except this time I took to the wheels off and re-applied Gyeon wheel coating. Honestly not sure if it helps with cleaning, since I wash the car every week the brake dust doesn’t have chance to adhere hard to the wheels, so it is always easy to sponge off. Regardless, I used the remaining half of the bottle I had an re-applied the coating...

Went to the weekly cruisin' night. Usually about 200 cars but it was threatening rain. :shrug:

dst3r said:

Finished a speaker upgrade in the doors of my 18. Sealed up the doors and deadened a bit. Installed Scanspeak 10F/4424 mid and 18W/4434 woofer. Big improvement in clarity, better mid-range and bass response.

Probably post a thread with more pics in the infotainment/audio forum when I have the time.

Click to expand...

In my expert opinion the SS 10F should be about the best choice you could have made!

SoCalTim said:

Full weekly clean, except this time I took to the wheels off and re-applied Gyeon wheel coating. Honestly not sure if it helps with cleaning, since I wash the car every week the brake dust doesn’t have chance to adhere hard to the wheels, so it is always easy to sponge off. Regardless, I used the remaining half of the bottle I had an re-applied the coating...

Click to expand...

Nice...Can give us a full side shot?

More about improving my connection to mustang6g than the car. It’s my first attempt at home networking. I wanted the switch on top of the patch panel but there was no loop left in the Cat 5E cables.

Got my first engine light, about 20 months after I bought it. Cobb was hooked up so I pushed a few buttons and got the code, air leak between throttle body and intake valve. Popped the hood and the hose clamp on the throttle body was loose. I had it off the other day to swap PCV baffles, so it was clearly all my fault. Easy fix.