Bluemustang
Well-Known Member
- Thread starter
- #1
I got BMR’s new and revised SP083 Handling springs installed today! I just thought I’d post it up because I’m real excited about it. This has been a few months in the making - contemplating my current suspension setup, seeking advice, going back and forth, etc. etc.
I also got a fresh alignment, as ya do whenever installing lowering springs.
For those don’t know here are the specs on it:
Spring rates: Front- 250 lbs/in, Rear 980 lbs/in
Drop: Front- 7/8”, Rear- 3/4”
I’m at work now so haven’t driven it much except back from the shop and a quick lunch out. Initial impressions are GOOD. More to come on this later!
I also got a fresh alignment, as ya do whenever installing lowering springs.
For those don’t know here are the specs on it:
Spring rates: Front- 250 lbs/in, Rear 980 lbs/in
Drop: Front- 7/8”, Rear- 3/4”
I’m at work now so haven’t driven it much except back from the shop and a quick lunch out. Initial impressions are GOOD. More to come on this later!
Sponsored