mikes2017gt
Well-Known Member
- Joined
- Feb 21, 2017
- Threads
- 59
- Messages
- 936
- Reaction score
- 311
- Location
- San Antonio, TX
- Vehicle(s)
- 17 GT Prem M/T 3.55
- Thread starter
- #1
This weekend I'll finally get my Brembo/rotors/stainless lines/pads swap done. What can I use to cap off the hard lines when I remove the brake hoses?
I know I'm going to have to bleed the system, but I'd rather not loose half the fluid in the process. The car only has 9K miles on it, all highway, so it's not like the stock fluid is all bad and needs to be swapped out anyway.
Not sure if there's some standard product people use to cap off brake hard lines, but would appreciate some ideas. Thanks.
I know I'm going to have to bleed the system, but I'd rather not loose half the fluid in the process. The car only has 9K miles on it, all highway, so it's not like the stock fluid is all bad and needs to be swapped out anyway.
Not sure if there's some standard product people use to cap off brake hard lines, but would appreciate some ideas. Thanks.
Sponsored