robw_39
Well-Known Member
- Joined
- Dec 11, 2015
- Threads
- 10
- Messages
- 106
- Reaction score
- 45
- Location
- Atlanta, GA
- Vehicle(s)
- 2018 Mustang GT
- Thread starter
- #1
So I have been working with my tuner Rob Shoemaker of Palm Beach Dyno and I think he has the car dialed in for the most part and I'm very happy with my results so far.
My car made 410 rwhp stock and with the speed limiter removed on the stock calibration it made 418 rwhp.
I then put on the flex fuel tune and JTL CAI and started testing the tunes I didn't do much testing on 93 most of my testing was on E85 and the tune I am running is a flex fuel tune. I have about 35 dyno pulls and more than a few tune revisions on the car and here are the final results as of yesterday with the Ngauge showing 77.3 Alcohol percentage.
The below image is newer numbers from this past Sunday this is still with the same mods...
I will have new numbers once I get my long tube headers installed but that will be a week or two from now.
My car made 410 rwhp stock and with the speed limiter removed on the stock calibration it made 418 rwhp.
I then put on the flex fuel tune and JTL CAI and started testing the tunes I didn't do much testing on 93 most of my testing was on E85 and the tune I am running is a flex fuel tune. I have about 35 dyno pulls and more than a few tune revisions on the car and here are the final results as of yesterday with the Ngauge showing 77.3 Alcohol percentage.
The below image is newer numbers from this past Sunday this is still with the same mods...
I will have new numbers once I get my long tube headers installed but that will be a week or two from now.
Sponsored
Last edited: