Stripe Width

For those that have stripes running the length of the car front to back, can you post up some pics? I would also like to know the width of the stripes and the space between the stripes.

Thanks
:ford:

Houston Kid said:

For those that have stripes running the length of the car front to back, can you post up some pics? I would also like to know the width of the stripes and the space between the stripes.

Thanks
:ford:

Click to expand...

The stripe dimensions off the GT350 are as follows;

Outside pinstripe: 1/4"
Main stripe: 6 13/16"
Distance between main stripes: 1 3/16"

My measurements straight off the car

Here’s mine. Always love posting a pic or two lol

1/4" Pin stripe
9" dual main
1 1/2" gap in between main

The outer white pin stripe is 1/2", the main stripe is 9 1/2" and the gap in the middle is 1 1/2"

Thanks. The measurements are missing on the other thread so this helps.

10” stripes, 1/2 gap
Edit: oops - 1” gap

Anyone with Silver Ignot Stripes?

Anyone with gunmetal metallic stripes with race red?

Anyone with Oxford White and gloss black stripes? Looking to do 7 inch stripes with a 1 inch space in between.

Well, I went with gloss black 7 inch stripes, with 1.25 inch spacing. I like how they turned out! The stripes and install was $500 out the door, which seemed to be pretty average. The vinyl shop that did it specifically didn't want to use the precut stripes due to having to blend the edges on the bumpers. Also, he did a nice job by removing the antenna, laying the stripes, and then putting it back on, so there isn't any space around it. There are a few small bubbles here and there, but very very minor. Overall, for an aftermarket vinyl job, without precut stripes, and not being painted on, I think it turned out well. I'll report back in a few months, but the vinyl shop warranties all their work for life, so I'm pretty confident it will last a long while.

Here's a few more.

Another pic

View media item 15482
I went with 1/2" stripes