DIY 18' manifold swap into 15-17'

I need some help guys I did my install i am runing lean up top close to redline at wot my tunner from Lund said it can be my fuel pump about to go or a kink in a like I’ve double checked everything idkbwhat I did wrong is anyone else having issues with this ? I am runing plug and play harness spliced the two blue connectors to as well unless my vacuum is wrong really need some help guys thank you

Flex fuel tune or regular tune? What bolt-ons? Stock injectors or LU47? How is the car running driving around town?

It’s a regular tune I have a pmas tune required intake 2018 manifold long tubes Catless mid pipe x pipe and roush axle back it runs strong really good but after data logging for Lund they told me I was runing lean close to redline

What is your redline? Who did your install? Nothing blocking your fuel rail inlet like apart of arag

My buddy did my install. And I don’t see anything blocking my fuel rail I will post pictures

here are some pics of my install

I would disconnect fuel rail line. Check to see if it is fine. Plus the coolant line should be on top on the plastic guard. So you have a reason to check anyways.

can someone take photos of the process for the TAP splice connector portion. Also what type of gauge should i be using. Thanks again guys

pigtails check (on wait list for Y connector), 5/8 hose clamps check, gotta get 5/8 hose from parts store. Anything else I need?

might go this route and just lock the runners open and I guess just loose that one vacuum pipe on the back of the intake and cap off.

I amhad issues runing my imrc so I am going to lock mine out as well and hope it works

I'm about to install mine with lockouts, N/A Lund tuned. What do I need to know as far as. vacumm line re-work ?

Does anyone on here have good pictures of how they ran vacuum when locking them out ? Need help going to reinstall mine witht the lock outs need pics of vacuums please !! And thank you

See post #43

I have an extra set of hellhorse connectors. If anyone interested. I dont need. 35. Bucks my loss your gain. Nothing wrong with just using eodtech kit