Intake manifold for 2017 GT

TopJimmyCooks · Nov 27, 2017

Had an engine light pop up today. Dealer said it is a bad (cracked, leaking?) intake manifold. He's seen it on a number of 2017 GTs. He said he hasn't seen it on any 2015 or 2016's. Apparently the replacement part is a redesign. I've got <8k miles.

SWETRID · Nov 27, 2017

Usually sets codes P0300 and P0308 very common on all 15-17 cars.

VooDooDaddy · Dec 1, 2017

An intake manifold from a 2015 or later F-150 (5.0) is a direct fit. It also has longer runners which are known to promote better mid-range torque?

You can pick up one on eBay for about $75 shipped.

I have one sitting in my garage and will be making the swap in the next few weeks, and FYI there is nothing wrong with the stock intake manifold on my 2016 GT, I am just trying to get a little more (15-20ft/lbs) torque in the RPM midrange?

YMMV

Dominant1 · Dec 1, 2017

I will sell you my 16 gt Intake manifold and tb for $150.00 it has 3000 miles on it, i replaced it with a gt 350 Intake manifold!

Kenny_S550GT · Dec 7, 2017

SWETRID said:
Usually sets codes P0300 and P0308 very common on all 15-17 cars.

Got these codes along with P0316. Only have 10K miles on it and bought new. Took it into the dealer last Monday. Service Adviser stated that the tech found that the runner flaps were not opening/closing all the way. Intake manifold was replaced and picked up car today. Warranty covered it.

Kenny

stang1971 · Dec 7, 2017

Same issue i had....P300 and P308..... new intake fixed my issues.

usgiorgi · Dec 11, 2017

My 2016 had the same exact problem. I've seen people with 2015s on here with the problem too. It happens to all S550s not just 17s.

jasduke · Apr 21, 2018

Had the same codes (P0300, P0308). Manifold was replaced. Anyone know the changes with the redesign? The new part number is SPO FR3Z 9424 N.

Chappers · May 18, 2018

Hey guys came across this as I'm having the same issues here in the UK, Ford have had my car a week for them to determine it is the intake manifold however I've got to wait another week whilst they get the part in from the states! :frusty:

Sway · May 18, 2018

VooDooDaddy said:
An intake manifold from a 2015 or later F-150 (5.0) is a direct fit. It also has longer runners which are known to promote better mid-range torque?

You can pick up one on eBay for about $75 shipped.

I have one sitting in my garage and will be making the swap in the next few weeks, and FYI there is nothing wrong with the stock intake manifold on my 2016 GT, I am just trying to get a little more (15-20ft/lbs) torque in the RPM midrange?

YMMV

Are you asking questions? I'm so confused

Intake manifold for 2017 GT

TopJimmyCooks

Well-Known Member

SWETRID

Well-Known Member

VooDooDaddy

Banned

Dominant1

Well-Known Member

Kenny_S550GT

Well-Known Member

stang1971

Well-Known Member

usgiorgi

Well-Known Member

jasduke

Well-Known Member

Chappers

Well-Known Member

Sway

Well-Known Member