davekro
Well-Known Member
- Joined
- Jan 6, 2015
- Threads
- 64
- Messages
- 1,742
- Reaction score
- 247
- Location
- East SF Bay Area
- First Name
- Dave
- Vehicle(s)
- Convertible, 3.7L, A/T, 051A, DIB
- Thread starter
- #1
Occasionally my top will make a sound like something is catching or hitting something it shouldn't, mostly during the final stage of retracting top. I thought it would be good to have a thread where those who find issues can report them as well as those who have found fixes for these issues could report and we can all avoid on going top operation problems.
I'll start with these items...
1) One time I had a 10" long plastic trim piece pop off the passenger side (would be just right of passengers head). I pressed it back on and have not had the issue repeat.
2) The issue that made me post this is now: Most of the time, on the drivers side part of the headliner (that has a thin piece of plastic sheet attached to it) always gets caught 'over' the folding rail instead of moving to the inside of the hinges as the other side does. I see a couple of wear spots on the edge of the head liner developing too.
I'll start with these items...
1) One time I had a 10" long plastic trim piece pop off the passenger side (would be just right of passengers head). I pressed it back on and have not had the issue repeat.
2) The issue that made me post this is now: Most of the time, on the drivers side part of the headliner (that has a thin piece of plastic sheet attached to it) always gets caught 'over' the folding rail instead of moving to the inside of the hinges as the other side does. I see a couple of wear spots on the edge of the head liner developing too.
Sponsored