Post your 20" wheel and tires!

[m3incorp]

No rubbing

Any rubbing issues?


Looks awesome, any issues with rubbing

Sponsored

 

[WD Pro]

Waiting for coating and the weather to warm up ...

20x10 (40) 285r30 & 20x11 (55) 305r30

Knurled tyre beads and built with Ford sized lug pockets and for Ford centre caps.

Maximum concavity profile on the rear, with a identical / matched concavity profile on the front :

Our euro version of your ECS2 :

Bonus points for fitment at the local Porsche centre, and for this one being built your side of the pond ... lol (it's a Singer) :

WD

 

[MAGS1]

Waiting for coating and the weather to warm up ...

20x10 (40) 285r30 & 20x11 (55) 305r30

Knurled tyre beads and built with Ford sized lug pockets and for Ford centre caps.

Maximum concavity profile on the rear, with a identical / matched concavity profile on the front :

Our euro version of your ECS2 :

Bonus points for fitment at the local Porsche centre, and for this one being built your side of the pond ... lol (it's a Singer) :

WD

Good looking wheels there Peter. 6GR?

 

[WD Pro]

Good looking wheels there Peter. 6GR?

Thank you !

They are a similar style to the 6GR 10's and they were on my shortlist, but they are BC forged.

Not easy to see on a black wheel photo, but the sides of the spokes are machined inwards which I don't think is possible on the 6GR 10's.

Along with the tweaks I mentioned on my first post, I also had some engraving done :

The engraving would have looked really nice after the coating (I was thinking of paint filling it in lime), but I decided against it due to potential corrosion issues and our wonderful UK weather ...

BCR were really good to work with, and especially good at being patient and understanding with me whilst I messed around with all the customisation ...

WD

 

[MAGS1]

Thank you !

They are a similar style to the 6GR 10's and they were on my shortlist, but they are BC forged.

Not easy to see on a black wheel photo, but the sides of the spokes are machined inwards which I don't think is possible on the 6GR 10's.

Along with the tweaks I mentioned on my first post, I also had some engraving done :

The engraving would have looked really nice after the coating (I was thinking of paint filling it in lime), but I decided against it due to potential corrosion issues and our wonderful UK weather ...

BCR were really good to work with, and especially good at being patient and understanding with me whilst I messed around with all the customisation ...

WD

BC makes a great wheel, they look really good. Filling in the “Forged” with Grabber Lime would’ve been an awesome touch but I understand your concerns in attempting to do that. Either way they look great, enjoy!

 

[bhulku]

project gr6 20x10 front 285

20x11 rear 305

 

[trewon1]

Shelby Cs-3 wheels 20x9.5 front(35) , 20 x 11 rear (30)

 

[Golgo69]

Steeda Mustang Trident Satin Black Staggered Wheel Package - 20x10/20x11

Got them this past November. I put some Nitto NT555 G2 on them ......yes I know, at that time, I did not know (and I usually do massive homework before pulling the trigger on anything). I literally did not even put 100 miles on them...

Anyhow, this month, when I realized the mistake I had made, I switched them out to these:

275/35ZR-20 Michelin Pilot Sport 4S
305/35ZR-20 Michelin Pilot Sport 4S

 

[Coyotebawl]

There is a thread "Aftermarket Wheels" that has a lot of 20" setups. Both sets of mine are Velgen 20x11 et 52 and 20x10 et 34 with 305/35r20 on the rear and 285/35r20 on the front on one set and 275/35r20 on the second set. Velgen VF9 top photo. Velgen Classic5 V2 bottom photo.

@m3incorp if you dont mind , what springs are you running in the above photo

 

[16RPG_Turbo]

Some of my fav pics

 

[Golgo69]

 

[m3incorp]

Hi, the springs are the Steeda Progressive.

@m3incorp if you dont mind , what springs are you running in the above photo

 

[Coyotebawl]

Thank you !

 

[sw686blue]

Here's my 2017 GTPP on 20s:

 

[Coyotebawl]

Nice ! Which springs are you running ?

Sponsored