Steeda Springs w/ 305 Rears

[Tyler2386]

I am going to a 305/35/20 in the rear. I had planned to add the Steeda sport springs, but I am worried the rear wheels with rub. Anyone have experience with this setup? Also could I just install the front steeda springs and be okay?

Sponsored

 

[EuroBoy]

from a lot of brian's vossen wheel pics, the 305 35 20 sure look like they will rub a lot, but according to him it's not rubbing.

it would look a little better if the tires were not so fatty looking. it just makes the wheels look too small.

I am going to a 305/35/20 in the rear. I had planned to add the Steeda sport springs, but I am worried the rear wheels with rub. Anyone have experience with this setup? Also could I just install the front steeda springs and be okay?

 

[Brian@Vossen]

With my 315/35/20 I have no issues with them. I am currently dropped on Eibach Pro-Kit springs, which i believe has the same drop as the Steeda springs so I highly doubt you will have problems with the tire setup you want to run.

 

[Tommy V]

With my 315/35/20 I have no issues with them. I am currently dropped on Eibach Pro-Kit springs, which i believe has the same drop as the Steeda springs so I highly doubt you will have problems with the tire setup you want to run.

Hey Brian what is the width of those rear 20's?

 

[MELLOWYELLOW06]

Rims are 20x10.5" et45

 

[Laztug]

I run steeda springs 20x11 315/35/20 MPSS rears w/no rubbing issues.

 

[Grimace427]

The bigger factor is the fit and offset of the wheels, not the springs.

 

[David@Steeda]

I run steeda springs 20x11 315/35/20 MPSS rears w/no rubbing issues.

Thanks for posting your setup for the OP!

 

[908ssp]

I run steeda springs 20x11 315/35/20 MPSS rears w/no rubbing issues.

Do you know what offset you are running on the rear and what are the specs of your front wheels and tires?

 

[Laztug]

Do you know what offset you are running on the rear and what are the specs of your front wheels and tires?

Front tires are 275/35/20, I do not rember what the front offsets are. Rears should be +55.

I have not had a chance to stop and take decent shots of the car, but here is an idea of how she sits.

http://s13.postimg.org/ccf9wvczr/20141206_003510_HDR.jpg

http://s4.postimg.org/opxvizy19/IMG_77656175187600_2.jpg

 

[FlowForm_Wheels]

The bigger factor is the fit and offset of the wheels, not the springs.

100% what he says ^^

On mine, I am running the "oversized" TOYO R888 315/30 20 on our upcoming FF15 wheels (rear) 20x11 et55. No issues what so ever. So in a nut shell, you will easily be able to run a 305 if the width and offset are right.

 

[Tyler2386]

Thanks, guys. I will be running the 20x10.5 (rear) HRE FF01. I don't know about the offset. I ordered them from Dan at Hypermotive.

 

[FlowForm_Wheels]

Thanks, guys. I will be running the 20x10.5 (rear) HRE FF01. I don't know about the offset. I ordered them from Dan at Hypermotive.

Wise choice!

You will not have a problem with a 305 tire on our FF01 20x10.5 et45. Take a look at Brian from Vossen's car as his rear wheel is the same width and offset as our FF01 (20x10.5 et45) and he is fitting a 315 with no issues.

You're dialed.

 

[Tyler2386]

Awesome. Thanks again.

 

[Grimace427]

Take a look at Brian from Vossen's car as his rear wheel is the same width and offset as our FF01 (20x10.5 et45) and he is fitting a 315 with no issues.

You're dialed.

So there's a guy from Vossen and a guy from HRE agreeing and giving props to each other in a car forum. Something's not right here. Shouldn't you guys be arguing and stealing each other's business? Seriously I need somebody to insult somebody's mother up in here. :lol:

Your mother was a hamster and your father smelt of elderberries! I fart in your general direction!

Sponsored