What did you do to your Mach 1 today

[TrackMeisterWannabe]

Installed the Steeda full length jacking rails, ZL1 Addon Rock guards and gt500 side skirt extensions.

Pics of the guards and skirts please. Thanks!

Sponsored

 

[MACHtobers Very Own]

Installed the Steeda full length jacking rails, ZL1 Addon Rock guards and gt500 side skirt extensions.

Are we spirit animals? I have same stuff ready to get installed.

 

[Coastal-Mach]

Are we spirit animals? I have same stuff ready to get installed.

Mach-Bros

 

[Coastal-Mach]

Pics of the guards and skirts please. Thanks!

 

[TrackMeisterWannabe]

Very Nice! Thinking I may do the same. Any pitfalls in the process? You gonna do anything for the rear?

 

[Coastal-Mach]

Very Nice! Thinking I may do the same. Any pitfalls in the process? You gonna do anything for the rear?

No, it was an easy install. The rears have the factory spats.

 

[ChitownStang]

3rd Oil change at 11k- Motorcraft Full Synthetic 5w30
Also cleaned out the rocks from the rear diffuser and used some double stick tape to make a gasket so rocks don’t get stuck in crack.

 

[Prodigal]

Added 2-3hp with this simple mod. Looks good and feels way more solid than the flimsy factory piece.
Steeda is quickly becoming what Quadratec was when I had my Jeep JT, the beneciary of a disproportionate amount of my disposable income. Not that it’s a bad thing, but rather just an observation.

 

[VladDracule]

First mod (GT500 spoiler), didn't install gurney flap because it arrived with some paint issues so I'll be getting another one, and first wash by me since ceramic coating and PPF

 

[Park]

That’s cool how MACH 1 is reflecting on the spoiler !

 

[dbhajek]

There are 3 plastic tabs you have pry up and then the tube slides out. It was easiest using 3 flat screwdrivers to hold the tabs up at the same time. Them you can take the filter out and slide the tube back in.

Thanks, I was able to remove it

 

[Prodigal]

First mod (GT500 spoiler), didn't install gurney flap because it arrived with some paint issues so I'll be getting another one, and first wash by me since ceramic coating and PPF

Very nice. Is that a factory spoiler or aftermarket? I assume it’s a simple bolt on? I’m on the fence regarding my factory M1 spoiler.

 

[VladDracule]

Very nice. Is that a factory spoiler or aftermarket? I assume it’s a simple bolt on? I’m on the fence regarding my factory M1 spoiler.

Oem ford part from steeda. Was over $100 cheaper from them rather than ford performance directly idk why.

The most difficult part is removing the old spoiler and the 3m tape. Installing the new one is dead simple, bolts are pre-installed and the same holes as the original, just peel off the tape fit it and put the washers on the pre-installed screws from the Deck lid

 

[KrucaBomba]

The most difficult part is removing the old spoiler and the 3m tape.

How have you removed the tape? Have you used an eraser wheel?

 

[2022 Mach 1]

First mod (GT500 spoiler), didn't install gurney flap because it arrived with some paint issues so I'll be getting another one, and first wash by me since ceramic coating and PPF

Looks good

Sponsored