M1 HP stock exhaust manifold

[WCRookie99]

How was the install? Heard it's almost impossible on jackstands.

Well, if I had to do it again, it would take 1/3 the time.

If only jack stands, maybe but certainly more difficult.

Two tips:
1. Left side install all top bolts approx 1/2 way, then Header, then bottom bolts. But the bottom closest to back of car doesn't fit unless all bolts are loose. (or grind 1/4 in off top of bolt).

2. Right side install top middle 2 bolts first 1/2 way, then Header. Then rest of bolts.

Need super long 11mm wrench plus all the tools suggested in this post.

https://www.mustang6g.com/forums/threads/kooks-1-7-8-header-install.169833/

Sponsored

 

[Brazos609]

Did you get them already coated from Kooks or send them off?

 

[WCRookie99]

Did you get them already coated from Kooks or send them off?

I had Kooks coat them, which they send out to a 3rd party.

Sponsored