ESS Centrifugal Mustang Superchargers

[Brad1810r80]

49 fuel pump

I've looked for that fuse do you remember it's name?

Sponsored

 

[TEXAS HEAT]

What belt is everyone using with the 120mm pulley? I'm using the K061031 on the 115mm instead of the recommended K061025 which was a struggle to fit with the 115mm. I'm getting ready to install the larger pulley (120mm) and was hoping to be able to use the same belt that is currently on the car.

 

[Brad1810r80]

Running K061031 with the 120mm pulley.

What belt is everyone using with the 120mm pulley? I'm using the K061031 on the 115mm instead of the recommended K061025 which was a struggle to fit with the 115mm. I'm getting ready to install the larger pulley (120mm) and was hoping to be able to use the same belt that is currently on the car.

 

[TEXAS HEAT]

Running K061031 with the 120mm pulley.

Does it go on without much effort, or do you have to gorilla arm it?

 

[Brad1810r80]

I put mine on with standard 3/8 ratchet 15mm socket by myself so not too bad at all.

Does it go on without much effort, or do you have to gorilla arm it?

 

[josephstef]

Since ive gone dual fuel pumps I no longer need the JMS BAP, its brand new unused. Anyone need one? Happy it let it go for $350 but the hard bit will be shipping from NZ. I imagine it will be around $400 USD all up incl shipping.

Just thought id put it here before I chuck it on eBay.

 

[Brad1810r80]

Here is my 1/8 mile pass from today. Only two runs 1st didn’t launch that hard ran [email protected] 1.51 60ft spun 1-2 shift bad. If it didn’t that would have been 6.1-6.2. Next time tried to launch harder spun bad so got out of it.

 

[Veteran]

Here is my 1/8 mile pass from today. Only two runs 1st didn’t launch that hard ran [email protected] 1.51 60ft spun 1-2 shift bad. If it didn’t that would have been 6.1-6.2. Next time tried to launch harder spun bad so got out of it.

Was that with a 120mm on pump ?

 

[Exploded_Muffin]

We’ll looks like our local track is opening up Sunday since is supposed to be nice out. It’s only 1/8 mile but I can get good idea how it will run in the 1/4. Stretch goal is a 6.4 @ 114 or so . I’m going to be on full send mode lol. She’s ready

Here is my 1/8 mile pass from today. Only two runs 1st didn’t launch that hard ran [email protected] 1.51 60ft spun 1-2 shift bad. If it didn’t that would have been 6.1-6.2. Next time tried to launch harder spun bad so got out of it.

Did better than you were expecting. Nice
That's a solid mid 9 run with 145+ trap speed. Really moving!
Was this on the 120mm pulley?

 

[Brad1810r80]

120mm on e30 , need a fuel system!!

Was that with a 120mm on pump ?

 

[Brad1810r80]

Yes sir 120mm pulley

Did better than you were expecting. Nice
That's a solid mid 9 run with 145+ trap speed. Really moving!
Was this on the 120mm pulley?

 

[kenand1988]

120mm on e30 , need a fuel system!!

Pressure drops? I thought the rail had sort of solved that

 

[Jake19gt10r80]

You would go faster with a vortech unit !!!!

Here is my 1/8 mile pass from today. Only two runs 1st didn’t launch that hard ran [email protected] 1.51 60ft spun 1-2 shift bad. If it didn’t that would have been 6.1-6.2. Next time tried to launch harder spun bad so got out of it.

 

[Brad1810r80]

So I can run more boost and e85. 4-5 more psi and e85 would be way faster

Pressure drops? I thought the rail had sort of solved that

 

[TEXAS HEAT]

Yes sir 120mm pulley

Hey Brad, I have to ask you... what are your goals with the car? Are you going for 8's?

Sponsored