StangTime
Well-Known Member
- Joined
- Apr 16, 2019
- Threads
- 77
- Messages
- 3,508
- Reaction score
- 3,933
- Location
- Ontario 🇨🇦
- First Name
- Todd
- Vehicle(s)
- 19' GT PP1 Manual
- Thread starter
- #16
Speaker detection can be disabled in Forscan. The BLU/WHT wire in the upper trunk harness is a good remote-on for most people and it's easy to hook into. There is a bit of a catch with it though... that is if you like to sit in the car and listen to music, you will have to make sure that the accessory power is on.It is. Running the power wire cleanly is really the most difficult part. A few notes (from my '21 9 speaker LOC sub install).
1) I would use posi-taps next time. The speaker wires are very small and braided and getting a tap in there... well posi-taps is the best way and the cleanest.
2) I would use a remote turn on (in the bundle in the trunk) not the amp line level "audio sensing" as a remote turn on. I tried this on my Jetta and at various times the car will check the speakers sending a false on signal (when you unlock the car for instance) and I got a "thump" from the sub, so I would use the remote wire.
Sponsored