Signature Wheel’s GT500 Adventures

[Manny231988]

Great I don't feel so bad now! I can't imagine the amount of texts, calls, and emails he fields a day.

Lol hardest thing I’ve had to do hands down

 

[kilobravo]

Quote: : How does one ever decide!?

Ultimately, I just bit the bullet and ordered my MOST RECENT favorite. :-)

 

[50 Deep]

It’s always been about making your car more capable.
.
20x11.5 square Signature Wheel Track Series SV504 and Precision Series SV703 built for JLT / J&L ‘s new Twister Orange Shelby GT500 .
.
Building the most versatile track and street options to suit your car goals.

 

[Shelbeast]

This thread is killing me! Just when I think I have my mind made up and want to place an order I see pics of other model wheels and I change my mind. 801's, 703's, 108's, 902's.... and the list goes on. How does one every decide!?

Everyone knows the SV302S (page 1) are the best. I have had dozens of people have their jaw reattached after seeing them. Some have stared for 10 minutes at car meetup. A few people have told me it's the best looking mustang/wheel combo they have ever seen.

 

[50 Deep]

We’ve been fortunate, now it’s time to give back. Here is a mod you can feel good about this holiday season.

 

[50 Deep]

Everyone knows the SV302S (page 1) are the best. I have had dozens of people have their jaw reattached after seeing them. Some have stared for 10 minutes at car meetup. A few people have told me it's the best looking mustang/wheel combo they have ever seen.

I don’t think many have seen a wheel that well made on a Mustang

 

[P4mnceblue82]

Everyone knows the SV302S (page 1) are the best. I have had dozens of people have their jaw reattached after seeing them. Some have stared for 10 minutes at car meetup. A few people have told me it's the best looking mustang/wheel combo they have ever seen.

I LOVE the 2 piece wheels. I'm just scared to run a 21". We have terrible pot hole infested roads. If I damaged one of those wheels, I'd be sick! But I'm still considering them!

 

[Shelbeast]

I LOVE the 2 piece wheels. I'm just scared to run a 21". We have terrible pot hole infested roads. If I damaged one of those wheels, I'd be sick! But I'm still considering them!

As an owner of 21s, get the 20s.

 

[P4mnceblue82]

As an owner of 21s, get the 20s.

That was my suspicion! Therefore the 2 piece are out of the equation. Kinda sucks but also helps make my decision a little easier! Lol

 

[Shelbeast]

That was my suspicion! Therefore the 2 piece are out of the equation. Kinda sucks but also helps make my decision a little easier! Lol

Oh, not because of curb rash. Its because they will rub unless you modify the wheel wells.

 

[P4mnceblue82]

Oh, not because of curb rash. Its because they will rub unless you modify the wheel wells.

Ohhh gotcha. Terrance did tell me that wpuld he necessary. How much modification was necessary
Really didn't want to get into that headache unless it's a quick and easy modification.

 

[Shelbeast]

Ohhh gotcha. Terrance did tell me that wpuld he necessary. How much modification was necessary
Really didn't want to get into that headache unless it's a quick and easy modification.

It’s not easy. Jmeo sold them to me and he did the modification.

 

[Jmeo]

Ohhh gotcha. Terrance did tell me that wpuld he necessary. How much modification was necessary
Really didn't want to get into that headache unless it's a quick and easy modification.

The rears fit fine. The fronts required me to reshape the wheel well liners, and cut out the air vent louvers that align with the front heat exchangers. I then created my own screens to protect the heat exchangers from rocks now that the louvers were cut out. Some have had to cut a bracket behind the liner at the rear of the front tire as well.

Personally, I would never use 21" wheels going forward. Tire size selection sucks for the front, and the rubbing wasn't worth the time invested (in hindsight). Let's not forget if you lower the car the headache is even worse.

They do look spectacular though......

 

[50 Deep]

These drag packs don’t get caught slipping.
.
20x11 / 18x11 square Signature Wheel Track Series SV502 built for Dennis’ 2020 Shelby GT500.
.
Finished in Gloss black with Exhibitions Of Speed bead lock enhancement.

 

[50 Deep]

The rears fit fine. The fronts required me to reshape the wheel well liners, and cut out the air vent louvers that align with the front heat exchangers. I then created my own screens to protect the heat exchangers from rocks now that the louvers were cut out. Some have had to cut a bracket behind the liner at the rear of the front tire as well.

Personally, I would never use 21" wheels going forward. Tire size selection sucks for the front, and the rubbing wasn't worth the time invested (in hindsight). Let's not forget if you lower the car the headache is even worse.

They do look spectacular though......

Good data to share.

it should be noted The 21” front rubbing was a result of the 305/30/21 tire being used though. With the recommmended 295/30/21 tire the rubbing issues don’t occur. That setup looks fantastic and works great