kai20035
Well-Known Member
- Joined
- Jun 5, 2016
- Threads
- 6
- Messages
- 249
- Reaction score
- 462
- Location
- Ontario, Canada
- First Name
- Peter Who
- Vehicle(s)
- 2016 Ford Mustang GT
- Thread starter
- #1
Just bought my ESR CS15 wheels and went with a squared setup with 19X9.5 ET35 with 285/35/19 Indy 500 tires.
Note: To clear the calipers on the 16 GT Base model I had to use a 1/4 wheel spacer which luckily it also makes my wheels sit perfectly flush from front to rear!
Now, I want to change my rear wheel setup from 19X9.5 ET35 to 19X10.5 ET22 so my question is:
1) Will the 19X10.5's ET22 sit 13mm more inwards towards the back but since it's a 10.5 wheel how much will be poking out, 1/2 an inch poke with it being an +22 offset?
Please keep in mind that the 19X9.5's ET35 sit 1/4 or (6mm) tucked and had to use 1/4 wheel spacers to make it sit flush! I spoke to 2 different guys from ESR and they both gave me 2 different answers! Now I need S550 support to understand this 100% because it's very hard to return wheels back to the US considering I'll be having shipped to Ontario, Canada.
My theory was, since my 19X9.5's are +35 offset and I'm using a 1/4 inch spacer (6mm) if you combine these numbers we got +41 Offset right at a flush fitment correct? So if I got 19X10.5 ET22 do I not subtract 41-28 and that's my poke, 13mm? Or am I just way off???
First pic are the 19X10.5's ET22 I want to get and second pic is the current setup!
Note: To clear the calipers on the 16 GT Base model I had to use a 1/4 wheel spacer which luckily it also makes my wheels sit perfectly flush from front to rear!
Now, I want to change my rear wheel setup from 19X9.5 ET35 to 19X10.5 ET22 so my question is:
1) Will the 19X10.5's ET22 sit 13mm more inwards towards the back but since it's a 10.5 wheel how much will be poking out, 1/2 an inch poke with it being an +22 offset?
Please keep in mind that the 19X9.5's ET35 sit 1/4 or (6mm) tucked and had to use 1/4 wheel spacers to make it sit flush! I spoke to 2 different guys from ESR and they both gave me 2 different answers! Now I need S550 support to understand this 100% because it's very hard to return wheels back to the US considering I'll be having shipped to Ontario, Canada.
My theory was, since my 19X9.5's are +35 offset and I'm using a 1/4 inch spacer (6mm) if you combine these numbers we got +41 Offset right at a flush fitment correct? So if I got 19X10.5 ET22 do I not subtract 41-28 and that's my poke, 13mm? Or am I just way off???
First pic are the 19X10.5's ET22 I want to get and second pic is the current setup!
Sponsored
Last edited: