Post Pix of your S550 with aftermarket wheels and tires

[s550_from_NJ]

If no rubs , wouldn't touch it. Just saying.

Roads around me aren’t the smoothest so if I hit a decent size bump or dip I’m worried about jamming the tire into the fender.

Sponsored

 

[fmc_smt]

If you go down a size , I would worry more about tacoing a wheel ......

 

[s550_from_NJ]

If you go down a size , I would worry more about tacoing a wheel ......

Yeah...I’d lose 0.6 of sidewall.

 

[Dave2013M3]

275/35/20 FS Indy 500
Niche M117 Gunmetal 20x10
Eibach springs

might go down a size to get a little more clearance

Do a 275/30/20 for the front leave the rear alone. A 27.7" tall tire is rather tall for the front. Car looks fabulous.

 

[s550_from_NJ]

Do a 275/30/20 for the front leave the rear alone. A 27.7" tall tire is rather tall for the front. Car looks fabulous.

That is probably what I’m leaning towards and thanks

 

[fmc_smt]

That is probably what I’m leaning towards and thanks

Just a thought, here is my set up , 255/35/20 front 305/30/20 rears . On sport lines no rub . Wheels are velgen vmb5 20x9+35 front 20x10.5+45 . The roads here are not the greatest , but no issues so far .

 

[DeadBroke3.7]

I would, but it's currently so caked in road salt that it's unrecognizable...

Understandable ... mine too -- a daily driver from WNY..

 

[BlackStallion18]

Just mounted some 19x10/11 MRR M600s today wrapped in 285/35/19 and 305/30/19 Nitto NT555 G2 tires. The car is lowered on BMR SP080 lowering springs (non-magneride). More pics to come, I didn't get the car home until after dark.

*Edit attached the same picture twice by accident

 

[Grant5566]

Getting lowering springs soon.

 

[Stage_3]

Just mounted some 19x10/11 MRR M600s today wrapped in 285/35/19 and 305/30/19 Nitto NT555 G2 tires. The car is lowered on BMR SP080 lowering springs (non-magneride). More pics to come, I didn't get the car home until after dark.

*Edit attached the same picture twice by accident

Wow, killer stance.

 

[MRGTX]

Getting lowering springs soon.

Unusual choice! They look pretty slick, Care to share any other pics/specs?

 

[MRGTX]

Just another set of SVE SP2. I waited a long time for these to come back in stock! 19x10 with 285/35/19 front, 19x11 with 325/30/19 rear.

 

[MexicanFiestaST]

Just installed four Shelby CS5. These replaced the PP1 wheels. I also went with 275/40R19 on all four instead of a staggered setup.

"Just installed four Shelby CS5. These replaced the PP1 wheels. I also went with 275/40R19 on all four instead of a staggered setup. "

So, for the wheels, also square, like the tires? Or different wheels front/rear? I'm guessing square wheels, just want to be sure.

 

[Matti777]

I just installed these...Forgestar CF10 19x10 with Michelin AS3+ 285/35/19. The car is lowered on Steeda progressives. The rears poke more than I thought they would. Its the best pic I can get until spring. The rear camber is a little excessive as I haven't adjusted that yet.

 

[karpetcm]

P51 101rf 20x10; 20x11

Shout out to Paul@PKAUTODESIGN for hooking me up with the wheel and tire combo; sitting on 275/35r20 and 315/35r20 Michelin Pilot Supersports. I ran into a problem with the Tire Pressure Sensors and Paul went above and beyond to make sure everything got sorted; despite me being in Florida and him being on the west coast. Thanks again for everything, car gets alot of compliments; I got my Bilstein PSS10 on order with some other bits to help improve the handling and the stance ;).

Hi Would you know your offsets front and rear? looks badass.

Sponsored