got_stanged
Member
- Thread starter
- #1
Looking to get winter tires on my 2019 GT PP1 with Brembo. Would 18 inch wheels clear? Thinking of getting the WS90. 235 50 18. Thank you
Sponsored
Here you go.....A wide variety of 18’s do fit, I posted a list of those I’ve physically tried myself in a thread in the tire and wheel category....(not sure how to link it).
The picture is of my 17 Mustang GT W/PP with 18 x 10 FC19 OE Racing Wheels, costing $124 ea. purchased of eBay.
With the amount of snow you guys get up there, a wide tire isn’t going to help, so an 18 x 8.5 would be a better option and a tire with a higher side wall would be best. If it’s acceptable in your locality a set of studded tires should assist in keeping you car safe.
They won’t fit. The aftermarket 18” wheels that do fit feature a different barrel and spoke design. Check the link in post #3 for a list of some of the 18” wheels that will fit. The only factory non pp wheels I can guarantee fitment of are the 20” foundry wheels as I’ve had them on my carSimilar question. I have a line on 18x8 2018 GT (non PP) take offs. I would like to use them for winter. Anyone know if they will fit a 2019 PP1?
Well, damn. Thanks for the info. Bummed, but not as much as if I had bought them!They won’t fit. The aftermarket 18” wheels that do fit feature a different barrel and spoke design. Check the link in post #3 for a list of some of the 18” wheels that will fit. The only factory non pp wheels I can guarantee fitment of are the 20” foundry wheels as I’ve had them on my car
Even with a 1" spacer? I test fit some base 18" take offs on my 19 GT PP car, and it only started to rub the caliper when I tried to push the wheel on the hub, but it fit over the lugs a good bit. Wondering if a 1" spacer would be just enough.They won’t fit. The aftermarket 18” wheels that do fit feature a different barrel and spoke design. Check the link in post #3 for a list of some of the 18” wheels that will fit. The only factory non pp wheels I can guarantee fitment of are the 20” foundry wheels as I’ve had them on my car
Depends on where it’s rubbing. Do the spokes touch the face of the caliper? Or does the barrel of the wheel touch the back side of the caliper? If the contact is only between the spokes and the face of the caliper, a spacer would do the trickEven with a 1" spacer? I test fit some base 18" take offs on my 19 GT PP car, and it only started to rub the caliper when I tried to push the wheel on the hub, but it fit over the lugs a good bit. Wondering if a 1" spacer would be just enough.
Apex wheels are guaranteed fitment for S550 they have a ton of pics on their site.Can someone with apex 18x11 wheels post a sort of close picture of what the wheel looks like and the proximity to the caliper with the 1" spacer? Does anyone know what happens to the increased scrub radius? Is this a problem?
Did you ever try this?Even with a 1" spacer? I test fit some base 18" take offs on my 19 GT PP car, and it only started to rub the caliper when I tried to push the wheel on the hub, but it fit over the lugs a good bit. Wondering if a 1" spacer would be just enough.
Yeah, still rubbed. Just sold the wheels off and got a set of 19's as snow wheelsDid you ever try this?